OEM 2000 Chevrolet Venture Starter

2000 Chevrolet Venture Parts Questions & Experts Answers

• Q: How to replace the PG260 F1 starter motor on 2000 Chevrolet Venture?

  A: To replace the pg260 f1 Starter motor, a starting point will be by first disconnecting the battery ground (negative) cable from the battery. Perform the clean-up within the vicinity. Finally, we will disconnect the Starter motor bat terminal nut and electrical leads, Starter motor s terminal nut and electrical lead. Finally, take out the bolts for the torque converter cover and the Starter motor bolts and then extract the Starter motor. For installation, start with the installation of the Starter motor and proceed to installing the Starter motor bolts, thus tightening them to a force of 47 n.m (35 lb ft). Re-install the torque converter cover, Starter motor s terminal electrical lead, and nut, installing the solenoid s terminal nut to 3 n.m (27 lb in). Therefore, fit the Starter motor bat terminal electrical leads and nut, tighten the solenoid bat terminal nut to 10 n.m (89 lb in). Bring the vehicle down and finally attach the battery ground (negative) cable to the battery.