OEM 2000 Chevrolet Venture Throttle Cable

2000 Chevrolet Venture Throttle Cable Parts and Q&A

• Q: How to replace the throttle cable on 2000 Chevrolet Venture?

  A: The procedure to replace throttle cable requires initial removal of the left instrument panel sound insulator before disconnecting the throttle cable from its connection to the pedal. Press the throttle cable cover tangs until you can push the cable through the bulkhead after which you should remove the shield if your vehicle has this component. The throttle cable removal requires operators to detach it first from its retaining clip then the throttle body lever after separating it from the throttle cable bracket to extract the cable from its position in the vehicle while recording the route for future installation. Avoid routing flexible components inside a 50 mm (2 in) distance from moving parts unless they receive proper secure fastening to avoid damage and interference. Safely route the throttle cable before placing the snap retainer through the bulkhead while connecting the cable with the throttle pedal lever slot. The snap retainer should rest inside the lever. First attach the throttle cable into position between the throttle body lever and throttle cable bracket before final coupling by installing it into retaining clips. Users must reinstall the throttle cable shield (if present), then inspect complete throttle motion ranges while operating the throttle pedal and test for poor carpet installation beneath the pedal. The last step entails installing the left instrument panel sound insulator.