How to raise and support, remove the tire and wheel assembly, and install a new upper control arm on 2000 GMC C2500?

First, lift the vehicle, secure it and take off the tire and wheel before repairing or servicing the front upper Control Arm. Unhook the rtd link rod from the sensor if you have one and get rid of the bolts that hold the brake hose and wheel sensor brackets in place. After that, remove the halfshaft followed by the nut that's attached to the upper Ball Joint. Remove the upper Control Arm's connection to the Steering Knuckle at the j 43631 point, then unscrew the upper Control Arm nuts and adjustment cams (2) and lastly remove the upper Control Arm bolts (4) from either 15 series rwd, 4wd or 25 series rwd vehicles. After completing that step, take off the upper Control Arm. Begin the installation with the upper Control Arm and put in the upper Control Arm bolts (4) for 25 series 4wd. Make sure to tighten the nuts to 190 nm (140 ft. Lbs.). After that, fit the upper Control Arm bolts (4) and tighten the nuts to the required level for all applicable models. Position the upper Control Arm above the Steering Knuckle, add the halfshaft and bolt the new nut on the upper Ball Joint stud, tightening it with a torque of 50 nm (37 ft. Lbs.). Reaffix the retaining bolts for the brake hose and wheel speed sensor brackets and tension them to 9 nm (80 inch lbs.) and if the rtd link rod is fitted, connect it to the sensor. In the end, put the tire and wheel combination into place, lower the vehicle, take off the safety supports and confirm the wheel alignment.

OEM 2000 GMC C2500 Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Control Arms found

View related parts
2000 GMC C2500 Lower Control Arm, Passenger Side Part Number: 12470402
$1.67 MSRP: $2.61
You Save: $0.94 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Kit, Steering Knuckle Upper & Lower Control; Control Arm
- Position: Passenger Side
- Replaced by: 15529829
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.3 x 3.1 x 0.8 inches
- Condition: New
- SKU: 12470402
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC C2500 Submodels:
- Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
2000 GMC C2500 Lower Control Arm, Driver Side Part Number: 12470401
$1.67 MSRP: $2.61
You Save: $0.94 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Kit, Steering Knuckle Upper & Lower Control; Control Arm
- Position: Driver Side
- Replaced by: 15529829
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.3 x 3.3 x 0.8 inches
- Condition: New
- SKU: 12470401
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC C2500 Submodels:
- Sierra SL, Sierra SLE, Sierra SLT | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
2000 GMC C2500 Lower Control Arm, Front Driver Side Part Number: 19416906
$386.72 MSRP: $637.05
You Save: $250.33 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Kit, Front Lower Control; Control Arm; Arm Kit, Steering Knuckle Upper & Lower Control
- Position: Front Lower Driver Side
- Replaces: 15665554
- Item Weight: 9.40 Pounds
- Item Dimensions: 22.4 x 18.2 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19416906
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC C2500 Submodels:
- Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
2000 GMC C2500 Upper Control Arm, Front Passenger Side Part Number: 19416905
$242.13 MSRP: $398.87
You Save: $156.74 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Kit, Front Upper Control; Control Arm; Arm Kit, Steering Knuckle Upper & Lower Control
- Position: Front Upper Passenger Side
- Replaces: 12361036
- Item Weight: 9.00 Pounds
- Item Dimensions: 16.2 x 15.4 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19416905
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC C2500 Submodels:
- Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
2000 GMC C2500 Lower Control Arm, Front Passenger Side Part Number: 19416897
Product Specifications
- Other Name: Arm Kit, Front Lower Control; Control Arm; Arm Kit, Steering Knuckle Upper & Lower Control
- Position: Front Lower Passenger Side
- Replaces: 15665555, 31022796
- Item Weight: 25.60 Pounds
- Item Dimensions: 22.1 x 17.3 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19416897
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC C2500 Submodels:
- Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
2000 GMC C2500 Lower Control Arm, Front Part Number: 15665555
Product Specifications
- Other Name: Arm Kit, Front Lower Control; Suspension Control Arm and Ball Joint Assembly; Control Arm Assembly; Control Arm; Arm Kit, Steering Knuckle Upper & Lower Control
- Position: Front Lower
- Replaced by: 19416897
- Item Weight: 26.30 Pounds
- Item Dimensions: 21.4 x 17.7 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15665555
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC C2500 Submodels:
- Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
2000 GMC C2500 Lower Control Arm, Passenger Side Part Number: 15006608
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.
- Position: Passenger Side
- Item Weight: 33.70 Pounds
- Item Dimensions: 20.7 x 21.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15006608
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC C2500 Submodels:
- Sierra SL, Sierra SLE, Sierra SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
2000 GMC C2500 Lower Control Arm, Driver Side Part Number: 15006607
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.
- Position: Driver Side
- Item Weight: 34.20 Pounds
- Item Dimensions: 21.1 x 18.7 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15006607
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC C2500 Submodels:
- Sierra SL, Sierra SLE, Sierra SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
2000 GMC C2500 Upper Control Arm, Driver Side Part Number: 12361035
Product Specifications
- Other Name: Arm Kit, Steering Knuckle & Control Arm Assembly with Ball Joint.
- Position: Driver Side
- Item Weight: 9.20 Pounds
- Item Dimensions: 16.3 x 13.4 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12361035
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC C2500 Submodels:
- Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
2000 GMC C2500 Upper Control Arm, Passenger Side Part Number: 12544000
Product Specifications
- Other Name: Arm Kit, Steering Knuckle & Control Arm Assembly with Ball Joint.
- Position: Passenger Side
- Replaces: 15634918
- Item Weight: 9.40 Pounds
- Item Dimensions: 14.2 x 12.5 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12544000
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC C2500 Submodels:
- Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
2000 GMC C2500 Upper Control Arm, Passenger Side Part Number: 12543998
Product Specifications
- Other Name: Arm Kit, Steering Knuckle & Control Arm Assembly with Ball Joint.
- Position: Passenger Side
- Replaces: 15616866
- Item Weight: 9.90 Pounds
- Item Dimensions: 20.1 x 13.9 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12543998
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC C2500 Submodels:
- Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
2000 GMC C2500 Upper Control Arm, Driver Side Part Number: 12543997
Product Specifications
- Other Name: Arm Kit, Steering Knuckle & Control Arm Assembly with Ball Joint.
- Position: Driver Side
- Item Weight: 9.50 Pounds
- Item Dimensions: 16.9 x 16.7 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12543997
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC C2500 Submodels:
- Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
2000 GMC C2500 Upper Control Arm, Driver Side Part Number: 12543999
Product Specifications
- Other Name: Arm Kit, Steering Knuckle & Control Arm Assembly with Ball Joint.
- Position: Driver Side
- Item Weight: 9.80 Pounds
- Item Dimensions: 14.6 x 12.4 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12543999
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC C2500 Submodels:
- Sierra, Sierra SL, Sierra SLE, Sierra SLT, Sierra SLX | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS

2000 GMC C2500 Control Arm

With a comprehensive array of OEM 2000 GMC C2500 Control Arm, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 GMC C2500 Control Arm are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 GMC C2500 Control Arm Parts and Q&A

Q: How to raise and support, remove the tire and wheel assembly, and install a new upper control arm on 2000 GMC C2500?
A: First, lift the vehicle, secure it and take off the tire and wheel before repairing or servicing the front upper Control Arm. Unhook the rtd link rod from the sensor if you have one and get rid of the bolts that hold the brake hose and wheel sensor brackets in place. After that, remove the halfshaft followed by the nut that's attached to the upper Ball Joint. Remove the upper Control Arm's connection to the Steering Knuckle at the j 43631 point, then unscrew the upper Control Arm nuts and adjustment cams (2) and lastly remove the upper Control Arm bolts (4) from either 15 series rwd, 4wd or 25 series rwd vehicles. After completing that step, take off the upper Control Arm. Begin the installation with the upper Control Arm and put in the upper Control Arm bolts (4) for 25 series 4wd. Make sure to tighten the nuts to 190 nm (140 ft. Lbs.). After that, fit the upper Control Arm bolts (4) and tighten the nuts to the required level for all applicable models. Position the upper Control Arm above the Steering Knuckle, add the halfshaft and bolt the new nut on the upper Ball Joint stud, tightening it with a torque of 50 nm (37 ft. Lbs.). Reaffix the retaining bolts for the brake hose and wheel speed sensor brackets and tension them to 9 nm (80 inch lbs.) and if the rtd link rod is fitted, connect it to the sensor. In the end, put the tire and wheel combination into place, lower the vehicle, take off the safety supports and confirm the wheel alignment.