OEM 2000 GMC Safari Starter

2000 GMC Safari Starter Parts Questions & Experts Answers

• Q: How to service and repair the starter motor on 2000 GMC Safari?

  A: A Starter motor repair or servicing requires users to disconnect the negative cable from the battery followed by raising the vehicle. Remove the Starter motor mounting bolts and the shims which were used earlier before lowering the Starter motor. The Starter service requires electrical lead disconnection of the Starter enable relay enable relay lead , the battery positive cable , and the generator output (BAT) lead from each terminal on the solenoid Starter before removing it. Installation starts by positioning the Starter enable relay lead loosely on the Starter solenoid terminal followed by the generator output (BAT) lead and the battery positive cable with their terminal retaining tabs properly set. Screw the Starter enable relay lead nut to 2 n.m while the battery positive cable nut should be tightened to 19 n.m. Iture the Starter motor to the engine by mounting two bolts with appropriate shims and tighten these bolts to 43 n.m (32 lb ft). After completing the task lower the vehicle then reattach the negative end of the battery.