How to replace the thermostat on 2001 Buick Park Avenue?

To replace the Thermostat, first, remove the engine lid and drain off the cooling system. Take off the inlet hose using the spring hose clamp pliers (J 38185) by loosening and sliding the inlet Radiator Hose clamp at the Thermostat Housing. Next, after turning the bolts and backing off the Thermostat Housing , disconnect and be sure to use the tool that the manufacturer equipped, to remove the Thermostat Housing, Thermostat. Clean the gasket mating surfaces, the housing, and the intake port. The Thermostat is installed first, followed by the Thermostat Housing with a new gasket . Thread on Thermostat Housing bolts and tighten to 20 nm (15 ft. Lbs.). Lastly, replace the inlet Radiator Hose and clamp, fill in the cooling system and replace the cover of the engine.

OEM 2001 Buick Park Avenue Thermostat

Engine Coolant Thermostat

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Thermostat found

View related parts
2001 Buick Park Avenue Thermostat Unit
Part Number: 24505924
$23.98 MSRP: $47.60
You Save: $23.62 (50%)
ADD TO CART
Product Specifications
- Other Name: Thermostat Assembly-Engine Coolant (W/Gasket); Thermostat; Thermostat, Engine Coolant Temperature
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.3 x 2.2 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24505924
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS

2001 Buick Park Avenue Thermostat

With a comprehensive array of OEM 2001 Buick Park Avenue Thermostat, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Buick Park Avenue Thermostat are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Buick Park Avenue Thermostat Parts Questions & Experts Answers

Q: How to replace the thermostat on 2001 Buick Park Avenue?
A: To replace the Thermostat, first, remove the engine lid and drain off the cooling system. Take off the inlet hose using the spring hose clamp pliers (J 38185) by loosening and sliding the inlet Radiator Hose clamp at the Thermostat Housing. Next, after turning the bolts and backing off the Thermostat Housing , disconnect and be sure to use the tool that the manufacturer equipped, to remove the Thermostat Housing, Thermostat. Clean the gasket mating surfaces, the housing, and the intake port. The Thermostat is installed first, followed by the Thermostat Housing with a new gasket . Thread on Thermostat Housing bolts and tighten to 20 nm (15 ft. Lbs.). Lastly, replace the inlet Radiator Hose and clamp, fill in the cooling system and replace the cover of the engine.