How to replace the A/C Hose in the discharge location on 2001 Cadillac Catera?

A replacement of the discharge hose starts by recovering refrigerant from the a/c system. Start by removing the intake air resonator and then follow by raising and supporting the vehicle. Disconnect the quick connect fitting from compressor hose then to discharge hose before disconnecting the a/c high pressure switch and a/c pressure sensor electrical connectors. Remove the condenser tube block fitting bolt followed by extracting the discharge hose from the system. It is critical to transfer both pressure switches during the discharge hose installation phase. The installation of the condenser tube block fitting bolt requires new o-rings with mineral oil 525 viscosity lubrication followed by bolt tightening to 27 n.m (20 lb ft). Fasten the a/c pressure sensor and high pressure switch electrical connectors before installing the compressor hose quick connect fitting onto the discharge hose through the use of both new o-rings that received lubrication with mineral oil of 525 viscosity. After lowering the vehicle you should reinstall the intake air resonator before fully completing the installation process by evacuating and recharging the air conditioning system. Perform a leak test on component fittings through use of the halogen leak detector (J 39400-A).

OEM 2001 Cadillac Catera A/C Hose

Air Conditioning Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 A/C Hoses found

View related parts
2001 Cadillac Catera A/C Hose
Part Number: 9146201
Product Specifications
- Other Name: Hose Assembly, A/C Compressor & Condenser; A/C Refrigerant Liquid Hose; A/C Hoses; Hose, A/C Compressor
- Item Weight: 2.20 Pounds
- Item Dimensions: 41.2 x 18.5 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9146201
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Catera Submodels:
- Base, Sport | 6 Cyl 3.0 L GAS
View related parts
2001 Cadillac Catera A/C Hose
Part Number: 24434961
Product Specifications
- Other Name: Tube, Air Conditioner Refrigerant (All Metal); A/C Refrigerant Liquid Hose; Tube, A/C Refrigerant (All Metal)
- Item Weight: 0.70 Pounds
- Item Dimensions: 16.5 x 8.4 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24434961
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Catera Submodels:
- Base, Sport | 6 Cyl 3.0 L GAS
View related parts
2001 Cadillac Catera A/C Hose
Part Number: 90494293
Product Specifications
- Other Name: Tube, Air Conditioner Refrigerant (All Metal); A/C Refrigerant Liquid Hose; Tube, A/C Refrigerant (All Metal)
- Item Weight: 0.90 Pounds
- Item Dimensions: 13.0 x 11.1 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90494293
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Catera Submodels:
- Base, Sport | 6 Cyl 3.0 L GAS
View related parts
2001 Cadillac Catera A/C Hose
Part Number: 90564647
Product Specifications
- Other Name: Evaporator Tube; A/C Refrigerant Liquid Hose; Tube, A/C Refrigerant (All Metal)
- Item Weight: 1.90 Pounds
- Item Dimensions: 30.6 x 8.5 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90564647
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Catera Submodels:
- Base, Sport | 6 Cyl 3.0 L GAS
View related parts
2001 Cadillac Catera Drain Tube
Part Number: 9146118
Product Specifications
- Other Name: Tube, A/C Evaporator & Blower Module Drain; Tube; Tube, A/C Evaporator
- Item Weight: 0.40 Pounds
- Item Dimensions: 7.3 x 5.4 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9146118
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Catera Submodels:
- Base, Sport | 6 Cyl 3.0 L GAS
View related parts
2001 Cadillac Catera Drain Hose
Part Number: 90457651
Product Specifications
- Other Name: Hose, Air Conditioner Evaporator; Hose, A/C Evaporator
- Position: Driver Side
- Item Weight: 0.30 Pounds
- Item Dimensions: 9.8 x 2.3 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90457651
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Catera Submodels:
- Base, Sport | 6 Cyl 3.0 L GAS
View related parts
2001 Cadillac Catera Drain Hose
Part Number: 90457631
Product Specifications
- Other Name: Hose, Air Conditioner Evaporator; Hose, A/C Evaporator
- Position: Passenger Side
- Item Weight: 0.30 Pounds
- Item Dimensions: 5.7 x 4.8 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 90457631
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Cadillac Catera Submodels:
- Base, Sport | 6 Cyl 3.0 L GAS

2001 Cadillac Catera A/C Hose

With a comprehensive array of OEM 2001 Cadillac Catera A/C Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Cadillac Catera A/C Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Cadillac Catera Parts Questions & Experts Answers

Q: How to replace the A/C Hose in the discharge location on 2001 Cadillac Catera?
A: A replacement of the discharge hose starts by recovering refrigerant from the a/c system. Start by removing the intake air resonator and then follow by raising and supporting the vehicle. Disconnect the quick connect fitting from compressor hose then to discharge hose before disconnecting the a/c high pressure switch and a/c pressure sensor electrical connectors. Remove the condenser tube block fitting bolt followed by extracting the discharge hose from the system. It is critical to transfer both pressure switches during the discharge hose installation phase. The installation of the condenser tube block fitting bolt requires new o-rings with mineral oil 525 viscosity lubrication followed by bolt tightening to 27 n.m (20 lb ft). Fasten the a/c pressure sensor and high pressure switch electrical connectors before installing the compressor hose quick connect fitting onto the discharge hose through the use of both new o-rings that received lubrication with mineral oil of 525 viscosity. After lowering the vehicle you should reinstall the intake air resonator before fully completing the installation process by evacuating and recharging the air conditioning system. Perform a leak test on component fittings through use of the halogen leak detector (J 39400-A).