OEM 2001 Chevrolet Impala Washer Reservoir

2001 Chevrolet Impala Parts Questions & Experts Answers

• Q: How to replace the windshield washer reservoir on 2001 Chevrolet Impala?

  A: You need to use a screwdriver to detach the windshield Washer Reservoir components. Start by removing the screw from the upper tube assembly and then taking off the entire unit plus its seal. Start by removing the right headlamp then proceed to unscrew the front washer solvent component and detach the front fender liner. Disconnect both the Washer Pump electrical connection and hose before using two screws to separate the washer solvent container from the vehicle. Unplug the washer solvent level sensor electrical connector and detach its container from the unit. Unfasten two screws and the bracket from the washer solvent container to access and remove the washer solvent level sensor and seal. Then take away the Washer Pump and its seal. Begin your work by inserting the Washer Pump and seal after which you will install the solvent level sensor and its associated seal. Use two screws to fasten the bracket onto the washer solvent container at 7 n.m (62 lb in). Position the washer solvent level sensor connector and connect it to the washer solvent container before installing the container to the vehicle with two screws tightened to 10 n.m (88 lb in). Affix the electrical connector and hose to the Washer Pump and attach the front washer solvent container screw that requires locking torque of 5 n.m (44 lb in). Put back the front fender and attach the right headlamp. Set the upper tube assembly into place along with the seal and attach the washer solvent container before tightening the upper fill tube screw to 10 n.m (88 lb in).