How to Remove and Install the Air Bag Clockspring Assembly on 2001 Chevrolet Lumina?

In order to take off the Air Bag Clock Spring Assembly, the SIR system should be disabled first. Disconnect, the connector with the steering wheel module and remove the module and steering wheel. Deconnect the module coil with the steering shaft. Installation requires coil securing, harness routing, and reconnecting it all and then proceed to enable the SIR system.

OEM 2001 Chevrolet Lumina Air Bag Clockspring

Steering Wheel Airbag Coil

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Air Bag Clockspring found

View related parts
2001 Chevrolet Lumina Coil Assembly Part Number: 26041005
Product Specifications
- Other Name: Coil Kit, Inflatable Restraint Steering Wheel Module; Air Bag Clockspring; Coil; Clockspring; Coil Kit, Inflatable Restraint System
- Replaces: 26053264
- Item Weight: 0.90 Pounds
- Item Dimensions: 6.1 x 5.3 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26041005
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Lumina Submodels:
- Base, Euro, LS, LTZ, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

2001 Chevrolet Lumina Air Bag Clockspring

With a comprehensive array of OEM 2001 Chevrolet Lumina Air Bag Clockspring, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Lumina Air Bag Clockspring are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Lumina Air Bag Clockspring Parts and Q&A

Q: How to Remove and Install the Air Bag Clockspring Assembly on 2001 Chevrolet Lumina?
A: In order to take off the Air Bag Clock Spring Assembly, the SIR system should be disabled first. Disconnect, the connector with the steering wheel module and remove the module and steering wheel. Deconnect the module coil with the steering shaft. Installation requires coil securing, harness routing, and reconnecting it all and then proceed to enable the SIR system.