OEM 2001 Chevrolet Prizm Fuel Rail

2001 Chevrolet Prizm Fuel Rail Parts Questions & Experts Answers

• Q: How to replace the fuel rail assembly on 2001 Chevrolet Prizm?

  A: The replacement process of the Fuel Rail assembly begins with acquiring the necessary tools that should include the fuel line quick connect separator (J 43178). Start by removing two fasteners together with two plastic retainers followed by removing the engine cover. First remove the connecting cover under the reduced pressure and then disconnect the coupling system. You should use the fuel line quick connect separator (J 43178) to remove the fuel feed hose coupling from the Fuel Rail pipe through the fuel feed pipe. During this process, use a shop towel to absorb any leaking fuel. You must first get rid of the fastener on the tv cable bracket and move the tv cable and bracket out of the Fuel Rail assembly area before disconnecting the electrical connectors from the fuel injectors. After disengaging the fasteners on the Fuel Rail separate the rail and spacers together from their position. To remove the fuel injectors the technician should extract each unit including their accompanying o-rings and grommets . When installing the new o-rings with grommets on fuel injectors use clean engine oil for lubrication. Secure the Fuel Rail and its spacers on the engine by fastening the 2 bolts to 18.5 n.m (13 lb ft). Connect the tv cable and bracket to the engine by using the fastener which needs to be tightened to 8.8 n.m (77 lb in). Secure the quick-connect fitting from the fuel feed hose to the fuel feed pipe of the Fuel Rail while putting on the quick connect coupling cover. After connecting the negative Battery Cable you should turn on the ignition to pressurize the fuel system followed by turning it off. Examine the system for fuel discharge then fix any detected leakage points. Replace the engine cover and fasten it down using two fasteners which should be tightened to 8.8 n.m (77 lb in) before installing the two plastic retainers.