Other Name: Bracket Assembly-Engine Mount (Left-Hand); Engine Mount Bracket; Motor Mount; Bracket, Engine Mounting
Position: Driver Side
Item Weight: 1.90 Pounds
Item Dimensions: 11.6 x 9.5 x 5.6 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 15969181
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2001 GMC Savana 1500 Submodels:
Base, SLE, SLT | 6 Cyl 4.3 L GAS
2001 GMC Savana 1500 Motor And Transmission Mount
With a comprehensive array of OEM 2001 GMC Savana 1500 Motor And Transmission Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 GMC Savana 1500 Motor And Transmission Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2001 GMC Savana 1500 Motor And Transmission Mount Parts Questions & Experts Answers
Q: How to replace the Motor and Transmission Mount on the 4L80-E automatic transmission on 2001 GMC Savana 1500?
A: The first step when replacing the 4l80-e automatic transmission transmission mount requires installation of a suitable transmission stand to support the Transmission Assembly. Use a transmission stand to support the assembly while you raise the Transmission Assembly slightly for removing the rear Engine Mount. The new rear Engine Mount installation should proceed to the transmission with careful attention to service precautions fastener notice. Screw and torque the rear Engine Mount bolts until they reach a torque value of 47 nm (35 ft. Lbs.). Set the engine's rear section before applying the rear Engine Mount's nut and washer. Secure all bolts to 47 nm (35 ft. Lbs.) torque. Lower your vehicle while removing the transmission stand.