Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15820075
Transmission Mount

1984-2013 GM

Customer Questions & Expert Answers (23)
GM 15820075 Transmission Mount
GM 15820075 Transmission Mount
GM 15820075 Transmission Mount
GM 15820075 Transmission Mount
  • Part Description
    Mount, Transmission Mounting; Engine Mount Bracket; Transfer Case Mount; Motor Mount
  • Replaces
    09767961, 15788795, 22145802, 22146231, 22111702, 9767961, 10001752, 14063010, 15753648, 22179377, 22201140, 22146106, 22111912
  • Manufacturer
    General Motors
Make sure this part fits
$25.58 MSRP: $43.93
You Save: $18.35 (42%)
1
ADD TO CART
  • 1993 Pontiac Firebird Transmission Mount Diagram for 15820075
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15820075

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, On Road Edition, WBH, Z668 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002 Chevrolet Avalanche 2500Base8 Cyl 8.1 L GAS
    1996-1998 Chevrolet C1500Base, Cheyenne, Silverado, WT6 Cyl 4.3 L GAS
    1993-1997 Chevrolet CamaroBase, Indianapolis 500 Pace Car, Z286 Cyl 3.4 L GAS, 8 Cyl 5.7 L GAS
    1996-2002 Chevrolet Express 1500Base, LS, LT8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
    1996-2002 Chevrolet Express 2500Base, LS8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1996-2002 Chevrolet Express 3500Base, LS8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1991-1995 Chevrolet G10Beauville, Chevy Van, Sportvan6 Cyl 4.3 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15820075 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15820075 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after installing the transmission mount for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Lower the transmission and install the two nuts securing the transmission mount to the transmission support, tightening them to 40 Nm (30 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Motor And Transmission Mount
    Q:
    What is the next step after installing the new transmission mount for the 2005 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Lower the transmission and install the transmission mount to the transmission support retaining nut or nuts, tightening them to 40 Nm (30 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Motor And Transmission Mount
    Q:
    What is the torque specification for tightening the bolts on 2WD for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    50 Nm (37 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Motor And Transmission Mount
    Q:
    What should be removed after supporting the transmission assembly for the 2002 Chevrolet Express 2500? Posted by Customer
    A:
    Remove the bolts and washers from the rear engine mount.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Motor And Transmission Mount
    Q:
    What is the final step in the process for the 2001 Chevrolet Express 3500? Posted by Customer
    A:
    Remove the transmission stand and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Motor And Transmission Mount
    Q:
    What is the first step to replace the transmission rear mount on the NV 3500 manual transmission for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    First, raise and suitably support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Motor And Transmission Mount
    Q:
    What should be done after tightening the transmission mount bolts for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Lower the transmission and then install the transmission mount to crossmember nuts, tightening them to 54 Nm (40 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Motor And Transmission Mount
    Q:
    What is the final step in the process for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Motor And Transmission Mount
    Q:
    What should be done after supporting the transmission for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Remove the transmission mount to the transmission support retaining nut or nuts, and raise the transmission to relieve the weight from the mount.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Motor And Transmission Mount
    Q:
    What is the final step in the process for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    Remove the transmission jack and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Motor And Transmission Mount
    Q:
    How do you install the new transmission mount for the 2006 Chevrolet Tahoe? Posted by Customer
    A:
    Position the transmission mount back onto the vehicle and install the transmission mount to the transmission or transfer case adapter mounting bolts, tightening them to 50 Nm (37 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Motor And Transmission Mount
    Q:
    What needs to be removed to detach the transmission mount from the transmission support for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Remove the two nuts securing the transmission mount to the transmission support.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Motor And Transmission Mount
    Q:
    What is the final step in the process for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Remove the transmission jack and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Motor And Transmission Mount
    Q:
    What is the next step after removing the bolts and washers for the 2002 GMC Savana 3500? Posted by Customer
    A:
    Raise the transmission assembly just enough to allow for the removal of the transmission mount.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Motor And Transmission Mount
    Q:
    What should be done after tightening the rear engine mount bolts for the 2001 GMC Savana 1500? Posted by Customer
    A:
    Lower the rear of the engine and install the nut and washer to the rear engine mount, tightening the bolts again to 47 Nm (35 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Motor And Transmission Mount
    Q:
    What is the final step in the process for the 2001 GMC Savana 2500? Posted by Customer
    A:
    Remove the transmission stand and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Motor And Transmission Mount
    Q:
    What should be done after supporting the transmission for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Remove the transmission mount to the transmission support retaining nut or nuts, and raise the transmission to relieve the weight from the mount.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Motor And Transmission Mount
    Q:
    What is the final step after completing the installation for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Finally, lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Motor And Transmission Mount
    Q:
    What is the process for installing the new transmission mount for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Position the new transmission mount in the vehicle and install it to the transmission or transfer case adapter mounting bolts, tightening them to 50 N.m (37 lb ft).
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Motor And Transmission Mount
    Q:
    What should be done after installing the rear transmission mount for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Install the transmission mount bolts and tighten them to 50 Nm (37 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Motor And Transmission Mount
    Q:
    What is the next step after installing the new transmission mount for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Lower the transmission and install the transmission mount to the transmission support retaining nut or nuts, tightening them to 40 Nm (30 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Motor And Transmission Mount
    Q:
    What should be done after supporting the transmission for the 2005 GMC Yukon? Posted by Customer
    A:
    Remove the transmission mount to the transmission support retaining nut or nuts, and raise the transmission to relieve the weight from the mount.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Motor And Transmission Mount
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Transmission Mount 15820075 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15820075 Transmission Mount is available in the market under the name GM Motor And Transmission Mount. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15820075 Transmission Mount fits certain Chevrolet S10, Tahoe, Camaro models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV and Pontiac Firebird models.
The original GM component designated by manufacturer part number 15820075 maintains top performance when functioning as the Mount, Transmission Mounting; Engine Mount Bracket; Transfer Case Mount; Motor Mount unit. The component 15820075 is constructed from durable material and its dimensions span 6.8 x 4.3 x 4.3 inches while weighing 1.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Transmission Mount Bracket; Mount. The part 15820075 has available replacement options 09767961, 15788795, 22145802, 22146231, 22111702, 9767961, 10001752, 14063010, 15753648, 22179377, 22201140, 22146106, 22111912. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.