How to replace the front shock absorbers on 2001 GMC Yukon XL 1500?

Starting the replacement process requires first raising the vehicle while supporting it to reach the front shock absorbers that perform dual functions in maintaining ride quality and suspension limits. The selected ride electrical connector should be disconnected before moving forward with work while the real time damping link rod requires removal when found on the sensor system. To disconnect the connector rotate the lock tabs moving in the counterclockwise direction followed by pulling it upward. To remove the nut from the tennon end use a wrench on the tennon end followed by taking off the upper insulator while keeping the plastic pilot ring in place. Detach mounting bolts at the lower Control Arm before pulling out the Shock Absorber through the bottom routing. Begin installation by using a suitable jack to align the tennon with the mounting hole of the lower Control Arm and then insert the Shock Absorber through both parts before placing it into the upper spring pocket. Attach the Shock Absorber to the lower Control Arm mounting holes before tightening the bolts to 25 nm (18 ft. Lbs.). Set the upper insulator above the shock mounting bracket while using the plastic pilot ring for positioning and position the nut against the tennon end without tightening it. The rtd link rod should be reconnected to the sensor when equipped then remove safety stands from the vehicle before lowering it. Utilizing a wrench on the tennon end of the shock maintain the holding position while torquing the nut up to 20 nm (15 ft. Lbs.). To finish installation connect the electrical connector by unlocking it first then position it correctly before pushing it down until the connector snaps into place and check for proper tab alignment. Dispose of the Shock Absorber appropriately.

OEM 2001 GMC Yukon XL 1500 Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Shock Absorbers found

View related parts
2001 GMC Yukon XL 1500 Shock, Rear
Part Number: 19331451
$465.47 MSRP: $838.68
You Save: $373.21 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Kit, Rear Shock; Shock Absorber; Absorber Kit, Front And Rear Suspension; Absorber Kit, Shock Absorber Air Lift
- Position: Rear
- Replaces: 19300045, 22400249, 22187160, 22187154
- Item Weight: 9.90 Pounds
- Item Dimensions: 30.2 x 4.3 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19331451
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Yukon XL 1500 Submodels:
- Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2001 GMC Yukon XL 1500 Shock Absorber
Part Number: 19300047
$356.66 MSRP: $639.74
You Save: $283.08 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Kit, Front And Rear Suspension; Shock
- Position: Front
- Replaces: 22187151, 22400884, 22400248, 22187157, 22187159, 22187155, 88965339
- Item Weight: 4.20 Pounds
- Item Dimensions: 23.1 x 3.5 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19300047
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Yukon XL 1500 Submodels:
- Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2001 GMC Yukon XL 1500 Shock Absorber
Part Number: 89038654
$78.71 MSRP: $140.57
You Save: $61.86 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Rear Shock; Suspension Shock Absorber; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Replaces: 22400060, 22400063
- Item Weight: 5.40 Pounds
- Item Dimensions: 26.5 x 4.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 89038654
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Yukon XL 1500 Submodels:
- Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2001 GMC Yukon XL 1500 Shock, Rear
Part Number: 12477517
$444.03 MSRP: $796.47
You Save: $352.44 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Kit, Rear Shock; Shock Absorber; Absorber Kit, Front And Rear Suspension
- Position: Rear
- Item Weight: 5.10 Pounds
- Item Dimensions: 4.1 x 4.2 x 34.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 12477517
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Yukon XL 1500 Submodels:
- Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2001 GMC Yukon XL 1500 Shock Absorber, Front
Part Number: 12477738
Product Specifications
- Other Name: Absorber Kit, Front Shock; Suspension Shock Absorber; Shock; Absorber Kit, Front And Rear Suspension
- Position: Front
- Item Weight: 4.20 Pounds
- Item Dimensions: 21.7 x 4.4 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 12477738
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Yukon XL 1500 Submodels:
- SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
2001 GMC Yukon XL 1500 Shock, Front
Part Number: 12477658
Product Specifications
- Other Name: Absorber Kit, Front Shock; Suspension Shock Absorber; Shock Absorber; Absorber Kit, Front And Rear Suspension
- Position: Front
- Item Weight: 3.80 Pounds
- Item Dimensions: 20.6 x 4.3 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 12477658
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Yukon XL 1500 Submodels:
- Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2001 GMC Yukon XL 1500 Shock Absorber
Part Number: 88983816
Product Specifications
- Other Name: Absorber Kit, Front Shock; Suspension Shock Absorber; Shock; Absorber Kit, Front And Rear Suspension
- Position: Front
- Replaces: 22400056
- Item Weight: 3.90 Pounds
- Item Dimensions: 26.8 x 4.5 x 3.5 inches
- Condition: New
- Require Quantity: 2
- SKU: 88983816
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Yukon XL 1500 Submodels:
- Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2001 GMC Yukon XL 1500 Shock Absorber
Part Number: 89038652
Product Specifications
- Other Name: Absorber Assembly, Front Shock; Shock; Absorber, Front And Rear Suspension
- Position: Front
- Replaces: 22064864
- Item Weight: 5.00 Pounds
- Item Dimensions: 26.3 x 4.8 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 89038652
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Yukon XL 1500 Submodels:
- Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2001 GMC Yukon XL 1500 Shock Absorber
Part Number: 89038595
Product Specifications
- Other Name: Absorber Kit, Front Shock; Shock; Absorber Kit, Front And Rear Suspension
- Position: Front
- Replaces: 22064861, 22064859
- Item Weight: 4.10 Pounds
- Item Dimensions: 27.3 x 4.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 89038595
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Yukon XL 1500 Submodels:
- Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2001 GMC Yukon XL 1500 Shock Absorber
Part Number: 88983818
$65.43 MSRP: $116.86
You Save: $51.43 (45%)
Product Specifications
- Other Name: Absorber, Rear Shock; Suspension Shock Absorber; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Replaces: 22400059
- Item Weight: 5.10 Pounds
- Item Dimensions: 4.1 x 4.1 x 26.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 88983818
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Yukon XL 1500 Submodels:
- Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2001 GMC Yukon XL 1500 Shock Absorber, Front
Part Number: 19300057
Product Specifications
- Other Name: Absorber Assembly, Front Shock; Absorber, Front And Rear Suspension
- Position: Front
- Replaces: 22400368, 22400194, 22064848, 88963425
- Item Weight: 4.30 Pounds
- Item Dimensions: 21.9 x 3.6 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19300057
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Yukon XL 1500 Submodels:
- Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2001 GMC Yukon XL 1500 Shock Absorber

With a comprehensive array of OEM 2001 GMC Yukon XL 1500 Shock Absorber, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 GMC Yukon XL 1500 Shock Absorber are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 GMC Yukon XL 1500 Shock Absorber Parts Questions & Experts Answers

Q: How to replace the front shock absorbers on 2001 GMC Yukon XL 1500?
A: Starting the replacement process requires first raising the vehicle while supporting it to reach the front shock absorbers that perform dual functions in maintaining ride quality and suspension limits. The selected ride electrical connector should be disconnected before moving forward with work while the real time damping link rod requires removal when found on the sensor system. To disconnect the connector rotate the lock tabs moving in the counterclockwise direction followed by pulling it upward. To remove the nut from the tennon end use a wrench on the tennon end followed by taking off the upper insulator while keeping the plastic pilot ring in place. Detach mounting bolts at the lower Control Arm before pulling out the Shock Absorber through the bottom routing. Begin installation by using a suitable jack to align the tennon with the mounting hole of the lower Control Arm and then insert the Shock Absorber through both parts before placing it into the upper spring pocket. Attach the Shock Absorber to the lower Control Arm mounting holes before tightening the bolts to 25 nm (18 ft. Lbs.). Set the upper insulator above the shock mounting bracket while using the plastic pilot ring for positioning and position the nut against the tennon end without tightening it. The rtd link rod should be reconnected to the sensor when equipped then remove safety stands from the vehicle before lowering it. Utilizing a wrench on the tennon end of the shock maintain the holding position while torquing the nut up to 20 nm (15 ft. Lbs.). To finish installation connect the electrical connector by unlocking it first then position it correctly before pushing it down until the connector snaps into place and check for proper tab alignment. Dispose of the Shock Absorber appropriately.

Related 2001 GMC Yukon XL 1500 Parts

Alternate Year Models

2000 GMC Yukon XL 1500 Shock Absorber 2002 GMC Yukon XL 1500 Shock Absorber