Make sure this part fits

GM 88983818
Shock Absorber

2000-2006 GM

Customer Questions & Expert Answers (14)
GM 88983818 Shock Absorber
GM 88983818 Shock Absorber
  • Part Description
    Absorber, Rear Shock; Suspension Shock Absorber
  • Position
    Rear
  • Replaces
    22400059
  • Manufacturer
    General Motors
Make sure this part fits
$65.43 MSRP: $116.86
You Save: $51.43 (45%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2000-2006 Chevrolet Suburban 1500Base, LS, LT, LTZ, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2000-2006 Chevrolet Suburban 2500Base, LS, LT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    2000-2006 Chevrolet TahoeBase, Limited, LS, LT, Z718 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
    2000-2006 GMC YukonDenali, SL, SLE, SLT8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2000-2006 GMC Yukon XL 1500Denali, SL, SLE, SLT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2000-2006 GMC Yukon XL 2500SLE, SLT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 88983818 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88983818 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after disconnecting the ESC connector for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Hold the tension end with a wrench while removing the nut, then remove the upper insulator without discarding the plastic pilot ring.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the final step in securing the shock absorber for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Install the lower shock absorber nut and bolt, tightening them to 95 Nm (70 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the next step after drilling the first hole for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Make an indentation in the middle of the tube with a centerpunch and drill a second hole at this centerpunch using the same drill bit.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What are the final steps after completing the installation for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    Remove the support from the rear axle, take away the safety stands, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What should be done while removing the nut from the tennon end for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Hold the tennon end with a wrench while removing the nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the first step in the installation process for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Install the new shock absorber.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the final step to drain the oil from the shock absorber for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Remove the shock absorber from the vise, hold it over a drain pan horizontally with the holes facing down, and move the rod in and out of the tube to completely drain the oil.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the next step after removing the nuts and bolts for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Lower the rear axle to facilitate the removal of the shock absorber, then take out the shock absorber.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the next step after installing the new shock absorber for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Install the upper shock absorber nut and bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the first step to replace the front shock absorbers for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    First, raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    What is the order of removing the shock absorber for the 2006 GMC Yukon? Posted by Customer
    A:
    Remove the upper shock absorber nut and bolt, followed by the lower shock absorber nut and bolt, and then take out the shock absorber.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How do you install the new shock absorber for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Place the new shock absorber and secure it with the upper shock absorber nut and bolt, ensuring to tighten both the upper and lower shock absorber nuts to 95 Nm (70 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    Q:
    How should the shock absorber be positioned to drain the oil for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Remove the shock absorber from the vise, hold it over a drain pan horizontally with the holes down.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Shock Absorber
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Shock Absorber 88983818 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 88983818 Shock Absorber is available in the market under the name GM Shock Absorber. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 88983818 Shock Absorber fits certain Chevrolet Tahoe, Suburban 1500, Suburban 2500 models, as well as GMC Yukon, Yukon XL 1500, Yukon XL 2500. Additionally, it is compatible with Cadillac Escalade, Escalade ESV models.
The original GM component designated by manufacturer part number 88983818 maintains top performance when functioning as the Absorber, Rear Shock; Suspension Shock Absorber unit at its Rear. The component 88983818 is constructed from durable material and its dimensions span 4.1 x 4.1 x 26.8 inches while weighing 5.10 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Shock; Absorber, Front And Rear Suspension. The part 88983818 has available replacement options 22400059. Each vehicle needs 2 units of the part marked as SKU 88983818. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.