OEM 2002 Buick Rendezvous Brake Master Cylinder

2002 Buick Rendezvous Brake Master Cylinder Parts Questions & Experts Answers

• Q: How to overhaul the brake master cylinder on 2002 Buick Rendezvous?

  A: First you need to take out the Brake Master Cylinder and hold its mounting flange in a bench vise while allowing access to the back of the primary Piston. Before taking off the cap and diaphragm clean the area around their location on the master cylinder reservoir. Check the cap and diaphragm for damage such as cuts, cracks, nicks, and bending to replace any defective parts. Pull out the primary Piston by pressing a smooth tool into the cylinder bore. Afterward latch the Piston retainer and lift out the primary Piston assembly from the cylinder. Insert plugs into the cylinder ports and back port before putting low non-oiled air into the front outlet to dissolve the secondary Piston with its seals and spring. Get rid of the primary Piston assembly with the Piston retainer and seals from the secondary Piston unit. Before assembly clean and inspect master cylinder parts including secondary Piston and return spring while looking for flaws during denatured alcohol treatment. Replace the master cylinder if any harm is observed. Use filtered dry air to clear all pieces before you fill the master cylinder bore, secondary Piston, return spring and other parts with delco supreme 11 (R) gm brake fluid p/n 12377967 or matching dot-3 brake fluid. Install the primary seal and retainer with new lubricant together with the secondary seal onto the secondary Piston before putting in the lubricated return spring and secondary Piston assembly into the cylinder bore. Finally insert the primary Piston assembly with its new lubricant. Position the new Piston properly using a rounded tool then put back the master cylinder reservoir with its parts as you replace the master cylinder.