How to replace the 1-2 Shift Solenoid Valve on 2002 Buick Rendezvous?

The first step in replacing the 1-2 shift solenoid valve is to take off the case side cover and after that, disconnect the transaxle wiring harness. Next, remove the 1-2 shift solenoid (315A). You should put the 1-2 shift solenoid (315A) in place to start, then reconnect the transaxle wiring harness, and at last, install the case side cover.

OEM 2002 Buick Rendezvous Shift Solenoid

Transmission Shift Solenoid

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Shift Solenoid found

View related parts
2002 Buick Rendezvous Gear Shift Assembly
Part Number: 88963458
$61.62 MSRP: $104.89
You Save: $43.27 (42%)
ADD TO CART
Product Specifications
- Other Name: Solenoid, Transmission Shift Brake Interlock; Automatic Transmission Selector Handle; Interlock Solenoid; Actuator
- Replaces: 88952012
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.3 x 2.0 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88963458
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

2002 Buick Rendezvous Shift Solenoid

With a comprehensive array of OEM 2002 Buick Rendezvous Shift Solenoid, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Buick Rendezvous Shift Solenoid are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Buick Rendezvous Parts Questions & Experts Answers

Q: How to replace the 1-2 Shift Solenoid Valve on 2002 Buick Rendezvous?
A: The first step in replacing the 1-2 shift solenoid valve is to take off the case side cover and after that, disconnect the transaxle wiring harness. Next, remove the 1-2 shift solenoid (315A). You should put the 1-2 shift solenoid (315A) in place to start, then reconnect the transaxle wiring harness, and at last, install the case side cover.