Other Name: Mount; Engine Mount Torque Strut; Engine Mount Bracket; Engine Mount; Side Mount; Front Mount; Mount, Engine Mount Dampening; Mount, Engine Mounting
Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
Item Weight: 2.60 Pounds
Item Dimensions: 6.9 x 7.1 x 3.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 15708673
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2002 Chevrolet Astro Submodels:
Base, CL, CS, LS, LT | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
2002 Chevrolet Astro Engine Mount
With a comprehensive array of OEM 2002 Chevrolet Astro Engine Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Astro Engine Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2002 Chevrolet Astro Parts Questions & Experts Answers
Q: How to replace the right engine mount on 2002 Chevrolet Astro?
A: The first step to replace the right Engine Mount begins with disconnecting the battery negative cable followed by vehicle elevation. Start by removing the right front tire together with the right fender wheelhouse extension before extracting the Starter from the vehicle. The first step involves removing both elements of the Engine Mount through-bolt and accompanying nut. A jack placed at the square tab on the engine block rear section should lift the engine just until the Engine Mount becomes removable. Follow the fender wheelhouse path to reach and unbolt the Engine Mount bracket to engine at its top two mounting points. First remove the Engine Mount bracket before proceeding to eliminate awd vehicle frame bolts on the Engine Mount or disassembling rwd vehicle frame bolts and frame nuts on the Engine Mount. First attach the awd vehicle Engine Mount to frame bolts while tightening them to 59 nm (44 ft. Lbs.) after which install the rwd vehicle right side Engine Mount bolts at 47 nm (35 ft. Lbs.) alongside the nuts at 42 nm (31 ft. Lbs.). Following this step is to install the Engine Mount bracket to the engine and to torque the bracket bolts to 64 nm (47 ft. Lbs.). The Engine Mount through-bolt should be installed while lower the engine and then by tightening it to 68 nm (50 ft. Lbs.). After reinstalling the Starter the technician must replace both the right fender wheelhouse extension and right front tire while lowering the vehicle then reconnect the battery negative cable.