OEM 2002 Chevrolet Impala Antenna Cable

2002 Chevrolet Impala Antenna Cable Parts Questions & Experts Answers

• Q: How to Replace an Antenna Cable on 2002 Chevrolet Impala?

  A: Start the process of replacing the Antenna Cable by first removing the rear upper quarter trim. Then disconnect the Antenna Cable from the radio antenna module. Second, remove the rear seat cushion and the rear seat back, i.e., the left carpet retainers, and the lower center pillar trim panel. Modify the carpet as necessary in order to find the Antenna Cable, then remove it from the antenna extension cable. On the visible end of the Antenna Cable from the wireing harness in the kick panel area and the rear shelf area, cut the visible end off. For the installation secure the Antenna Cable to the vehicle with the electrical tape to secure the antenna extension cable to the top of wiring harness and secure at least every 150mm (6in). Make sure that the Antenna Cable uses a sliding snap-lock; holding this feature will hamper the proper installation. Attach the antenna extension cable from the radio to the Antenna Cable near the kick panel while placing it at the back of the sliding lock feature and fixing it to the sliding lock. Then reinstall the carpet, lower center pillar trim panel, left carpet retainers, rear seat back, and the rear seat cushion. Finally, attach the Antenna Cable to the radio antenna module in placing it behind the sliding lock feature, then attach your radio antenna module to the sliding lock, and reinstall the rear upper quarter trim panel.