OEM 2002 Chevrolet Monte Carlo Battery Cable

2002 Chevrolet Monte Carlo Battery Cable Parts Questions & Experts Answers

• Q: How to replace the positive battery cable on 2002 Chevrolet Monte Carlo?

  A: The procedure to replace a battery positive cable requires users to disconnect the negative battery cable before moving on to the positive battery cable. Start by separating the ground wire bolt along with the ground wire from the frame before removing the remote positive stud cover. The technician should first detach both the positive cable junction block lead nut and the positive battery cable from the underhood accessory wiring junction block. Begin by raising and supporting the vehicle before taking off the front lower air deflector. First disconnect the positive battery cable nut at the starter motor BAT terminal and then remove the positive battery cable from the same terminal. The battery cable harness needs to be unclipped from retainers (2,3,4) before being extracted from the vehicle while the positive battery cable should be pulled from the wiring harness conduit. Start installation by placing the positive battery cable into the wiring harness conduit after you secure the battery cable harness onto retainers (2,3,4). Affix the positive battery cable to the starter motor BAT terminal before screwing on its nut which should be tightened to 10 N.m (89 lb in). Reinstall the front lower air deflector while lowering the vehicle then connect the positive battery cable at the underhood accessory wiring junction block. Fasten the positive cable junction block lead nut before tightening it to 10 N.m (89 lb in). Screw and join the ground wire while fixing its bolt to the frame with a torque of 10 N.m (89 lb in). To complete the procedure connect the positive battery cable before securing the terminal bolt to 15 N.m (11 ft lb) and then connect the negative battery cable.