How to properly replace a Power Steering Hose on 2002 Chevrolet S10?

A person begins replacing the power steering pressure hose by safely raising and supporting the vehicle then they must eliminate any steering linkage shields that exist before continuing. A drain pan should be placed under the vehicle before disconnecting the Power Steering Pump pressure hose. Lower the vehicle until it reaches the ground level and take out the air cleaner assembly. You must disconnect the power steering gear pressure hose from the gear unit before extracting the hose from the vehicle. After raising the vehicle you should install the power steering gear pressure hose to its proper place while guarding against twisting or bending. Secure the power steering gear pressure hose to the gear by tightening it to 30 nm using torque procedures. Finally, replace the air cleaner assembly followed by lifting the vehicle once more to install the power steering gear pressure hose on the Power Steering Pump and tighten it to 25 nm (18 ft. Lbs.). After drain pan removal you must install the steering linkage shield but only if it was present along with lowering the vehicle before performing power steering system bleeding.

OEM 2002 Chevrolet S10 Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Power Steering Hoses found

View related parts
2002 Chevrolet S10 Power Steering Return Hose Part Number: 7828506
$39.37 MSRP: $73.94
You Save: $34.57 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose-Hydraulic Steering Return 3/8 Idx10Ft; Power Steering Hose; Inlet, Reservoir, Outlet, Return, Upper Return Hose; Steering Gear Oil Return; Standard Parts.
- Item Weight: 1.60 Pounds
- Item Dimensions: 10.0 x 9.7 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7828506
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet S10 Submodels:
- Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
2002 Chevrolet S10 Power Steering Pressure Hose Part Number: 26042259
Product Specifications
- Other Name: Hose, Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Hydraulic Steering Gear Pressure
- Item Weight: 1.70 Pounds
- Item Dimensions: 9.0 x 2.7 x 14.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26042259
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet S10 Submodels:
- Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
2002 Chevrolet S10 Power Steering Pressure Hose Part Number: 26051961
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Hydraulic Steering Gear Pressure
- Item Weight: 1.80 Pounds
- Item Dimensions: 24.1 x 15.1 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26051961
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet S10 Submodels:
- Base, LS, Xtreme | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS
View related parts
2002 Chevrolet S10 Cooling Pipe Part Number: 15159570
Product Specifications
- Other Name: Pipe-Power Steering Fluid Cooling; Cooler Pipe; Pipe, Steering Fluid Cooler
- Replaces: 15672772
- Item Weight: 5.50 Pounds
- Item Dimensions: 25.4 x 14.6 x 14.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15159570
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet S10 Submodels:
- Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
2002 Chevrolet S10 Power Steering Return Hose Part Number: 26056367
Product Specifications
- Other Name: Hose, Power Steering Gear Outlet; Power Steering Hose; Outlet Hose; Return Hose; Hose, Steering Gear Oil Return
- Replaces: 26044567
- Item Weight: 1.00 Pounds
- Item Dimensions: 4.7 x 16.9 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26056367
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet S10 Submodels:
- Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS

2002 Chevrolet S10 Power Steering Hose

With a comprehensive array of OEM 2002 Chevrolet S10 Power Steering Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet S10 Power Steering Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet S10 Power Steering Hose Parts and Q&A

Q: How to properly replace a Power Steering Hose on 2002 Chevrolet S10?
A: A person begins replacing the power steering pressure hose by safely raising and supporting the vehicle then they must eliminate any steering linkage shields that exist before continuing. A drain pan should be placed under the vehicle before disconnecting the Power Steering Pump pressure hose. Lower the vehicle until it reaches the ground level and take out the air cleaner assembly. You must disconnect the power steering gear pressure hose from the gear unit before extracting the hose from the vehicle. After raising the vehicle you should install the power steering gear pressure hose to its proper place while guarding against twisting or bending. Secure the power steering gear pressure hose to the gear by tightening it to 30 nm using torque procedures. Finally, replace the air cleaner assembly followed by lifting the vehicle once more to install the power steering gear pressure hose on the Power Steering Pump and tighten it to 25 nm (18 ft. Lbs.). After drain pan removal you must install the steering linkage shield but only if it was present along with lowering the vehicle before performing power steering system bleeding.