How to replace the steering knuckle on 2002 Chevrolet S10?

To replace the steering knuckle, lift the car, take the tire, wheel and wheel hub off. Remove the outer tie rod end, bracketing and cotter pins from the ball joints. Disconnect and install a new steering knuckle using tools, tightening retaining nuts and installing new cotter pins. Reinstall wheel hub and check alignment.

OEM 2002 Chevrolet S10 Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Steering Knuckles found

View related parts
2002 Chevrolet S10 Knuckle, Driver Side Part Number: 15294229
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Replaces: 15704493, 18060557
- Item Weight: 11.10 Pounds
- Item Dimensions: 5.9 x 12.9 x 12.5 inches
- Condition: New
- SKU: 15294229
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet S10 Submodels:
- Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
2002 Chevrolet S10 Knuckle, Passenger Side Part Number: 18060558
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaced by: 15294230
- Item Weight: 12.30 Pounds
- Item Dimensions: 5.8 x 13.0 x 12.5 inches
- Condition: New
- SKU: 18060558
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet S10 Submodels:
- Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
2002 Chevrolet S10 Steering Knuckle, Passenger Side Part Number: 18060564
Product Specifications
- Other Name: Knuckle Assembly, Steering; Knuckle; Knuckle, Steering
- Position: Passenger Side
- Replaces: 15958716
- Item Weight: 14.50 Pounds
- Item Dimensions: 18.2 x 10.3 x 9.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18060564
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet S10 Submodels:
- Baja, Base, Durango, EL, LS, Sport, SS, Tahoe, Xtreme, ZR2, ZR5 | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS

2002 Chevrolet S10 Steering Knuckle

With a comprehensive array of OEM 2002 Chevrolet S10 Steering Knuckle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet S10 Steering Knuckle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet S10 Steering Knuckle Parts and Q&A

Q: How to replace the steering knuckle on 2002 Chevrolet S10?
A: To replace the steering knuckle, lift the car, take the tire, wheel and wheel hub off. Remove the outer tie rod end, bracketing and cotter pins from the ball joints. Disconnect and install a new steering knuckle using tools, tightening retaining nuts and installing new cotter pins. Reinstall wheel hub and check alignment.