How to service the EGR valve on 2002 Chevrolet Suburban 1500?

Removal of intake duct, and disconnection of EGR electrical connector are required to service the EGR Valve. Remove the valve and the flange gasket and clean the surface. Install a new gasket, and thereafter the EGR valve, screwing the fasteners. Lastly, re-attach the electrical connector and fit the intake duct again.

OEM 2002 Chevrolet Suburban 1500 EGR Valve

Emissions EGR Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 EGR Valve found

View related parts
2002 Chevrolet Suburban 1500 Throttle Position Sensor Part Number: 12576918
Product Specifications
- Other Name: Valve, Emission Control System; EGR Vacuum Solenoid; EGR Valve; Valve, Emission Control System(EGR Control)
- Replaces: 17113278, 17113575, 12568582, 17093020, 17096188, 17113619, 17113618, 17113303, 17113615, 17113405
- Item Weight: 2.10 Pounds
- Item Dimensions: 6.4 x 4.9 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12576918
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Suburban 1500 Submodels:
- Base, LS, LT, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS

2002 Chevrolet Suburban 1500 EGR Valve

With a comprehensive array of OEM 2002 Chevrolet Suburban 1500 EGR Valve, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Suburban 1500 EGR Valve are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Suburban 1500 EGR Valve Parts and Q&A

Q: How to service the EGR valve on 2002 Chevrolet Suburban 1500?
A: Removal of intake duct, and disconnection of EGR electrical connector are required to service the EGR Valve. Remove the valve and the flange gasket and clean the surface. Install a new gasket, and thereafter the EGR valve, screwing the fasteners. Lastly, re-attach the electrical connector and fit the intake duct again.