How to replace the rear Ride Height Sensor for the electronic suspension on 2002 Chevrolet Suburban 1500?

Begin replacement of the rear position sensor for the electronic suspension by supporting and lifting the vehicle while removing the wheel and tire joint. You must disconnect the sensor harness from the vehicle harness before removing the bolt which secures the real time damping (RTD) sensor link bracket. Open the bracket while detaching it from the upper Control Arm before removing the frame screws to remove the position sensor. The installation of the new position sensor should begin by placing it on the vehicle while adhering to the fastener notice in service precautions. Attach the bolts to their respective frame positions before securing them at 12 nm torque strength (106 inch lbs.). You should place the upper Control Arm bracket inside the locating stops before tightening its bolt to 25 nm (18 ft. Lbs.). The process completes with connecting the sensor harness to its vehicle harness before wheel installation and lowering the vehicle.

OEM 2002 Chevrolet Suburban 1500 Ride Height Sensor

Suspension Level Hight Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Ride Height Sensors found

View related parts
2002 Chevrolet Suburban 1500 Rear Sensor, Passenger Side
Part Number: 22175445
Product Specifications
- Other Name: Sensor, Air Suspension Leveling Or Level Control; Ride Height Sensor
- Position: Passenger Side
- Item Weight: 0.90 Pounds
- Item Dimensions: 6.4 x 4.3 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22175445
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Suburban 1500 Submodels:
- LS, LT, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
2002 Chevrolet Suburban 1500 Rear Sensor, Driver Side
Part Number: 22175444
Product Specifications
- Other Name: Sensor, Air Suspension Leveling Or Level Control; Ride Height Sensor
- Position: Driver Side
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.4 x 4.3 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22175444
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Suburban 1500 Submodels:
- LS, LT, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
2002 Chevrolet Suburban 1500 Front Sensor, Passenger Side
Part Number: 22175443
Product Specifications
- Other Name: Sensor, Air Suspension Leveling Or Level Control
- Position: Passenger Side
- Item Weight: 0.90 Pounds
- Item Dimensions: 8.2 x 5.5 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22175443
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Suburban 1500 Submodels:
- LS, LT, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
2002 Chevrolet Suburban 1500 Front Sensor, Driver Side
Part Number: 22175442
Product Specifications
- Other Name: Sensor, Air Suspension Leveling Or Level Control
- Position: Driver Side
- Item Weight: 1.10 Pounds
- Item Dimensions: 6.5 x 4.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22175442
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Suburban 1500 Submodels:
- LS, LT, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS

2002 Chevrolet Suburban 1500 Ride Height Sensor

With a comprehensive array of OEM 2002 Chevrolet Suburban 1500 Ride Height Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Suburban 1500 Ride Height Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Suburban 1500 Ride Height Sensor Parts Questions & Experts Answers

Q: How to replace the rear Ride Height Sensor for the electronic suspension on 2002 Chevrolet Suburban 1500?
A: Begin replacement of the rear position sensor for the electronic suspension by supporting and lifting the vehicle while removing the wheel and tire joint. You must disconnect the sensor harness from the vehicle harness before removing the bolt which secures the real time damping (RTD) sensor link bracket. Open the bracket while detaching it from the upper Control Arm before removing the frame screws to remove the position sensor. The installation of the new position sensor should begin by placing it on the vehicle while adhering to the fastener notice in service precautions. Attach the bolts to their respective frame positions before securing them at 12 nm torque strength (106 inch lbs.). You should place the upper Control Arm bracket inside the locating stops before tightening its bolt to 25 nm (18 ft. Lbs.). The process completes with connecting the sensor harness to its vehicle harness before wheel installation and lowering the vehicle.