Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 22175443
Front Sensor, Passenger Side

2000-2003 GM

Customer Questions & Expert Answers (7)
GM 22175443 Front Sensor, Passenger Side
  • Part Description
    Sensor, Air Suspension Leveling Or Level Control
  • Position
    Passenger Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 22175443 Front Sensor, Passenger Side is Ref No. 4 in the diagram below

    2003 GMC Yukon XL 2500 Front Sensor, Passenger Side Diagram for 22175443
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 22175443

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2003 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2003 Chevrolet Suburban 1500LS, LT, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2003 Chevrolet Suburban 2500LS, LT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    2000-2003 Chevrolet TahoeBase, LS, LT, Z718 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2000-2003 GMC YukonDenali, SLE, SLT8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2003 GMC Yukon XL 1500Denali, SLE, SLT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2003 GMC Yukon XL 2500SLE, SLT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22175443 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22175443 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front Ride Height Sensor for the electronic suspension on Chevrolet Suburban 2500? Posted by Customer
    A:
    The first step to replace the front position sensor for the electronic suspension requires that you raise and support the vehicle. The sensor harness connector must be removed from its connection with the vehicle harness connector and the wheel speed sensor wire must be detached from the real time damping (RTD) sensor bracket. The installation begins with removing the bolt linking the rtd sensor to the upper Control Arm alongside the frame bolt followed by extracting the position sensor from the vehicle. Start by placing the position sensor on the vehicle and secure the frame bolt through it while tightening to 12 nm (106 inch lbs.). Secure the (RTD) sensor link bracket bolt onto the upper Control Arm while torquing it to 9 nm (80 inch lbs.). The wheel speed sensor wire must connect to real time damping (RTD) sensor bracket while the sensor harness connector joins the vehicle harness connector before lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front Ride Height Sensor for the electronic suspension on Chevrolet Suburban 1500? Posted by Customer
    A:
    Vehicle elevation and proper vehicle support are necessary before starting the replacement of the front position sensor for the electronic suspension. Detach the sensor harness connector from its connection to the vehicle harness connector before removing the wheel speed sensor wire from its fixture at the real time damping (RTD) sensor bracket. You must first separate the metering wire from the (RTD) sensor bracket and afterwards disconnect both the (RTD) sensor link bracket bolt from the upper Control Arm and the bolt from the frame. Proceed by taking out the position sensor from its vehicle installation. Installation begins with mounting the position sensor onto the vehicle yet following the guidelines stated in the fastener notice of the service precautions. Begin by installing the frame bolt then tighten it to 12 nm before moving on to installing the upper Control Arm (RTD) sensor link bracket bolt and tightening it to 9 nm. The wheel speed sensor wire must be replaced between both the real time damping (RTD) sensor bracket and the (RTD) sensor bracket. Proceed to connect the sensor harness connector with the vehicle harness connector before removing safety stands while lowering the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you remove the position sensor for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Remove the bolts and take out the position sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ride Height Sensor
    Q:
    What is the torque specification for tightening the bolts to the frame for the 2002 Chevrolet Suburban 1500? Posted by Customer
    A:
    12 Nm (106 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ride Height Sensor
    Q:
    What should be removed next for the 2003 Chevrolet Suburban 1500? Posted by Customer
    A:
    Remove the ESC sensor link bracket bolt from the upper control arm and the bolt from the frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ride Height Sensor
    Q:
    What is the next step after disconnecting the sensor harness connector for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Remove the bolts and take out the position sensor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Ride Height Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Front Sensor, Passenger Side 22175443 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 22175443 Front Sensor, Passenger Side is available in the market under the name GM Ride Height Sensor. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 22175443 Front Sensor, Passenger Side fits certain Chevrolet Tahoe, Suburban 1500, Suburban 2500 models, as well as GMC Yukon, Yukon XL 1500, Yukon XL 2500. Additionally, it is compatible with Cadillac Escalade, Escalade ESV models.
The original GM component designated by manufacturer part number 22175443 maintains top performance when functioning as the Sensor, Air Suspension Leveling Or Level Control unit at its Passenger Side. The component 22175443 is constructed from durable material and its dimensions span 8.2 x 5.5 x 5.4 inches while weighing 0.90 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 22175443 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.