How to replace the 4WD Actuator on the Transfer Case on 2002 Chevrolet Suburban 2500?

Change the Transfer Case Motor/Encoder -If the transfer case shield and front propeller shaft need to be changed, lift the vehicle up and then take those pieces off. Unconnect the motor/encoder connectors and take out the assembly. Make sure that the transfer case is in neutral when installing the new unit. Rebconnect the electrical connector and reinstall the parts.

OEM 2002 Chevrolet Suburban 2500 4WD Actuator

Four-Wheel Drive Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 4WD Actuator found

View related parts
2002 Chevrolet Suburban 2500 Switch Actuator, Front Part Number: 26060073
$152.29 MSRP: $259.27
You Save: $106.98 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator, Front Drive Axle; 4WD Actuator; Switch; Actuator; Actuator, Front Drive Axle Shifter/Lock
- Position: Front
- Item Weight: 4.10 Pounds
- Item Dimensions: 8.5 x 3.3 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26060073
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Suburban 2500 Submodels:
- Base, LS, LT, LTZ | 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS

2002 Chevrolet Suburban 2500 4WD Actuator

With a comprehensive array of OEM 2002 Chevrolet Suburban 2500 4WD Actuator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Suburban 2500 4WD Actuator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Suburban 2500 4WD Actuator Parts and Q&A

Q: How to replace the 4WD Actuator on the Transfer Case on 2002 Chevrolet Suburban 2500?
A: Change the Transfer Case Motor/Encoder -If the transfer case shield and front propeller shaft need to be changed, lift the vehicle up and then take those pieces off. Unconnect the motor/encoder connectors and take out the assembly. Make sure that the transfer case is in neutral when installing the new unit. Rebconnect the electrical connector and reinstall the parts.