How to replace the Power Steering Pressure Switch on 2002 Chevrolet Tracker?

The first step to replace the Power Steering Pressure Switch involves disconnecting the electrical connector from the power steering pressure (PSP) switch. The psp switch should be detached from the Power Steering Pump. You should place the psp switch into the Power Steering Pump before securing it with 27 nm of torque (20 ft. Lbs.). Before final installation the psp switch electrical connector must be connected while performing air bleed procedures on the power steering system.

OEM 2002 Chevrolet Tracker Power Steering Pressure Switch

Power Steering Oil Pressure Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Steering Pressure Switch found

View related parts
2002 Chevrolet Tracker Power Steering Pressure Switch
Part Number: 91174759
Product Specifications
- Other Name: Switch, Steering Gear Oil Pressure; Switch, Hydraulic Steering Gear Pressure
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.3 x 4.2 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 91174759
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Tracker Submodels:
- Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

2002 Chevrolet Tracker Power Steering Pressure Switch

With a comprehensive array of OEM 2002 Chevrolet Tracker Power Steering Pressure Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Tracker Power Steering Pressure Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Tracker Parts Questions & Experts Answers

Q: How to replace the Power Steering Pressure Switch on 2002 Chevrolet Tracker?
A: The first step to replace the Power Steering Pressure Switch involves disconnecting the electrical connector from the power steering pressure (PSP) switch. The psp switch should be detached from the Power Steering Pump. You should place the psp switch into the Power Steering Pump before securing it with 27 nm of torque (20 ft. Lbs.). Before final installation the psp switch electrical connector must be connected while performing air bleed procedures on the power steering system.

Related 2002 Chevrolet Tracker Parts

Alternate Year Models

2001 Chevrolet Tracker Power Steering Pressure Switch 2003 Chevrolet Tracker Power Steering Pressure Switch