How to remove and replace the Body Control Module on 2002 Chevrolet Venture?

The first step to remove the Body Control Module is to take off the negative cable from the battery. Then, take out the right side instrument panel insulator. Tap the release tab at the bottom of the bracket to remove the Body Control Module from the bracket, and then disconnect the wires. To install, attach the connectors to the module, make sure the tabs fit into the slots on the bracket, then push the module up and let it click into place. When you are done, replace the right side instrument panel insulator and attach the negative Battery Cable.

OEM 2002 Chevrolet Venture Body Control Module

BCM

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Body Control Modules found

View related parts
2002 Chevrolet Venture Module
Part Number: 9382120
$140.71 MSRP: $262.57
You Save: $121.86 (47%)
ADD TO CART
Product Specifications
- Other Name: Module Assembly, Theft Deterrent; Module,Theft Deterrent Or Front/Rear/Side/Intake Object
- Item Weight: 0.60 Pounds
- Item Dimensions: 6.3 x 5.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9382120
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2002 Chevrolet Venture Module
Part Number: 10333593
Product Specifications
- Other Name: Module, Theft Deterrent Or Front/Rear/Side Object; Module,Theft Deterrent Or Front/Rear/Side/Intake Object
- Position: Rear
- Replaces: 10417552, 10312199
- Item Weight: 0.80 Pounds
- Item Dimensions: 5.1 x 5.0 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10333593
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2002 Chevrolet Venture Control Module
Part Number: 10304215
Product Specifications
- Other Name: Module, Headlamp/Fog Lamp/Turn Signal
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.5 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10304215
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2002 Chevrolet Venture Window Regulator, Front Passenger Side
Part Number: 16639552
Product Specifications
- Other Name: Module Assembly-Front Side Door Locking System (W/Window Regulator); Lock Module; Module, Front Door Window Regulator; Module, Door Lock Remote Control
- Position: Front Passenger Side
- Replaces: 16638386, 16638636
- Item Weight: 14.50 Pounds
- Item Dimensions: 46.3 x 25.5 x 12.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16639552
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

2002 Chevrolet Venture Body Control Module

With a comprehensive array of OEM 2002 Chevrolet Venture Body Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Venture Body Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Venture Parts Questions & Experts Answers

Q: How to remove and replace the Body Control Module on 2002 Chevrolet Venture?
A: The first step to remove the Body Control Module is to take off the negative cable from the battery. Then, take out the right side instrument panel insulator. Tap the release tab at the bottom of the bracket to remove the Body Control Module from the bracket, and then disconnect the wires. To install, attach the connectors to the module, make sure the tabs fit into the slots on the bracket, then push the module up and let it click into place. When you are done, replace the right side instrument panel insulator and attach the negative Battery Cable.