How to replace the body control module on 2003 Chevrolet Venture?

Start by disconnecting the battery negative cable and unclipping the right side panel insulator to access the Body Control Module. Push the release button at the bottom of the bracket to disconnect the Body Control Module from its position. After that slide the module out from the bracket and detach the electrical connectors. Mount the new Body Control Module by plugging in its electrical connections first. Then position the brackets' slots with their tabs and push up the module until it snaps into position. Attach the right side instrument panel component while also connecting the battery's negative wiring. After installing the new bcm you need to run programming steps to configure its settings.

OEM 2003 Chevrolet Venture Body Control Module

BCM

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Body Control Modules found

View related parts
2003 Chevrolet Venture Module Part Number: 15277715
Product Specifications
- Other Name: Module, Theft Deterrent; Module,Theft Deterrent Or Front/Rear/Side/Intake Object
- Replaces: 09382190, 10303381, 10313651, 9382190
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.2 x 3.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15277715
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Venture Submodels:
- LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2003 Chevrolet Venture Module Part Number: 10333593
Product Specifications
- Other Name: Module, Theft Deterrent Or Front/Rear/Side Object; Module,Theft Deterrent Or Front/Rear/Side/Intake Object
- Position: Rear
- Replaces: 10417552, 10312199
- Item Weight: 0.80 Pounds
- Item Dimensions: 5.1 x 5.0 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10333593
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2003 Chevrolet Venture Control Module Part Number: 10304215
Product Specifications
- Other Name: Module, Headlamp/Fog Lamp/Turn Signal
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.5 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10304215
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2003 Chevrolet Venture Window Regulator, Front Passenger Side Part Number: 16639552
Product Specifications
- Other Name: Module Assembly-Front Side Door Locking System (W/Window Regulator); Lock Module; Module, Front Door Window Regulator; Module, Door Lock Remote Control
- Position: Front Passenger Side
- Replaces: 16638386, 16638636
- Item Weight: 14.50 Pounds
- Item Dimensions: 46.3 x 25.5 x 12.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16639552
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

2003 Chevrolet Venture Body Control Module

With a comprehensive array of OEM 2003 Chevrolet Venture Body Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet Venture Body Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Chevrolet Venture Body Control Module Parts and Q&A

Q: How to replace the body control module on 2003 Chevrolet Venture?
A: Start by disconnecting the battery negative cable and unclipping the right side panel insulator to access the Body Control Module. Push the release button at the bottom of the bracket to disconnect the Body Control Module from its position. After that slide the module out from the bracket and detach the electrical connectors. Mount the new Body Control Module by plugging in its electrical connections first. Then position the brackets' slots with their tabs and push up the module until it snaps into position. Attach the right side instrument panel component while also connecting the battery's negative wiring. After installing the new bcm you need to run programming steps to configure its settings.