How to service the camshaft position sensor on 2002 Chevrolet Venture?

The Camshaft Position Sensor requires service when the ignition system is turned off. Start by removing the Power Steering Pump then disconnect the electrical connection of the camshaft position (CMP) sensor. Start by unbolting the cmp sensor before pulling it out from the system. Check the cmp sensor 0-ring for wear and leakage if you do not plan to replace the sensor. When installing the sensor apply clean engine oil to the 0-ring while replacing it if you detect any signs of damage. Connect the cmp sensor before torquing the retaining bolt to 8 n.m (71 lb ft). Put the Power Steering Pump back into position while attaching the cmp sensor electrical connector.

OEM 2002 Chevrolet Venture Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2002 Chevrolet Venture Camshaft Position Sensor
Part Number: 12567650
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor
- Replaces: 24507588
- Item Weight: 0.50 Pounds
- Item Dimensions: 5.9 x 4.2 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12567650
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

2002 Chevrolet Venture Camshaft Position Sensor

With a comprehensive array of OEM 2002 Chevrolet Venture Camshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Venture Camshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Venture Parts Questions & Experts Answers

Q: How to service the camshaft position sensor on 2002 Chevrolet Venture?
A: The Camshaft Position Sensor requires service when the ignition system is turned off. Start by removing the Power Steering Pump then disconnect the electrical connection of the camshaft position (CMP) sensor. Start by unbolting the cmp sensor before pulling it out from the system. Check the cmp sensor 0-ring for wear and leakage if you do not plan to replace the sensor. When installing the sensor apply clean engine oil to the 0-ring while replacing it if you detect any signs of damage. Connect the cmp sensor before torquing the retaining bolt to 8 n.m (71 lb ft). Put the Power Steering Pump back into position while attaching the cmp sensor electrical connector.

Related 2002 Chevrolet Venture Parts

Alternate Year Models

2001 Chevrolet Venture Camshaft Position Sensor 2003 Chevrolet Venture Camshaft Position Sensor