OEM 2002 Chevrolet Venture Seat Cushion Pad

2002 Chevrolet Venture Seat Cushion Pad Parts Questions & Experts Answers

• Q: How to replace the rear seat back cover and Seat Cushion Pad for the AL4 - Bucket on 2002 Chevrolet Venture?

  A: Replacement of the AL4 - Bucket rear seat back cover and pad requires the removal of both the second row bucket seat and the head restraint before moving on to the rear seat back finish panel. The next sequence is to divide the J retainer from where it attaches to the bottom of the rear seat back cover followed by removing the rear seat back recliner cover. To access recliner bolts users need to remove rear seat back cover together with foam from the recliner before removing these bolts. Users must first separate the rear seat back from the rear seat cushion and then take out the rear seat back cover retainer rings. You must slowly move the back cover from the foam pad while unfastening both hook and loop retainers to finish taking off the rear seat pad from the frame. The rear seat back pad needs to be installed on the seat back frame first before applying the rear seat back cover over the foam pad and fastening everything with retainer rings through hook and loop retainers. Reposition the rear seat back onto the seat cushion after securing the recliner bolts to the specified torque of 32 N.m (24 lb ft). Reinstall the rear seat back recliner cover by placing the recliner bolts inside the front foam and rear cover section. You should complete installation by fastening the J retainer along the bottom border of the rear seat back cover followed by reinstallation of the rear seat back finish panel together with the head restraint and the second row bucket seat.