OEM 2002 Chevrolet Venture Starter

2002 Chevrolet Venture Parts Questions & Experts Answers

• Q: How to service the PG260 F1 starter motor on 2002 Chevrolet Venture?

  A: Disconnection of the battery ground (negative) cable from the battery represents the first step in servicing pg260 f1 Starter motor components. Support the vehicle in a proper position and remove the radiator air baffle assembly. Begin by removing the Starter motor bat terminal nut and electrical leads then disconnect the Starter motor s terminal nut and electrical lead. The torque converter cover and Starter motor bolts must be removed before extracting the Starter motor. Start by mounting the Starter motor and its bolts then apply sufficient torque up to 47 n.m (35 lb ft). After reattaching the torque converter cover install the Starter motor s terminal cable along with its nut and apply 3 n.m (27 lb in) torque to the solenoid s terminal fastener. Tighten the solenoid bat terminal nut to 10 n.m (89 lb in) while installing the Starter motor bat terminal electrical leads. Finish the procedure by installing the radiator air baffle assembly, lowering the vehicle and reattaching the battery ground (negative) cable to the battery.