How to replace the steering knuckle on 2002 Chevrolet Venture?

Steering Knuckle replacement begins with vehicle elevation and appropriate support system application. First remove the tire assembly along with wheel then remove the front wheel drive shaft bearing. The universal steering linkage puller (J 24319-B) helps remove the front lower control arm ball stud and the outer Tie Rod End from the Steering Knuckle. First mark the stru connection on the knuckle before you disconnect the knuckle bolts to take out the component from the vehicle. Position the knuckle back onto the vehicle before tightening the bolts which join the knuckle to the strut at 123 nm (90 ft. Lbs.). Begin installation by placing the front lower control arm ball stud into the knuckle followed by reinstalling the outer tie rod to the Steering Knuckle then reinstalling the front wheel drive shaft bearing. After completion the tire and wheel assembly should be restored to its position and the car lowered back to the ground.

OEM 2002 Chevrolet Venture Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Steering Knuckles found

View related parts
2002 Chevrolet Venture Knuckle, Driver Side
Part Number: 23127629
$281.50 MSRP: $442.93
You Save: $161.43 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering (Machining); Knuckle, Steering
- Position: Driver Side
- Replaces: 18060638, 18060652, 88955418, 10434254, 18060680, 20899802, 25816684, 22990752
- Item Weight: 5.10 Pounds
- Item Dimensions: 5.9 x 12.9 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23127629
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2002 Chevrolet Venture Knuckle, Passenger Side
Part Number: 22990753
$268.07 MSRP: $421.79
You Save: $153.72 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering (Machining)
- Position: Passenger Side
- Replaced by: 23127630
- Item Weight: 5.20 Pounds
- Item Dimensions: 5.4 x 13.1 x 12.6 inches
- Condition: New
- SKU: 22990753
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2002 Chevrolet Venture Knuckle, Rear Driver Side
Part Number: 18060684
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Rear Driver Side
- Item Weight: 5.30 Pounds
- Item Dimensions: 11.8 x 11.2 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18060684
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2002 Chevrolet Venture Knuckle, Rear Passenger Side
Part Number: 18060685
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Rear Passenger Side
- Item Weight: 5.50 Pounds
- Item Dimensions: 11.4 x 11.7 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18060685
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

2002 Chevrolet Venture Steering Knuckle

With a comprehensive array of OEM 2002 Chevrolet Venture Steering Knuckle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Venture Steering Knuckle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Venture Steering Knuckle Parts Questions & Experts Answers

Q: How to replace the steering knuckle on 2002 Chevrolet Venture?
A: Steering Knuckle replacement begins with vehicle elevation and appropriate support system application. First remove the tire assembly along with wheel then remove the front wheel drive shaft bearing. The universal steering linkage puller (J 24319-B) helps remove the front lower control arm ball stud and the outer Tie Rod End from the Steering Knuckle. First mark the stru connection on the knuckle before you disconnect the knuckle bolts to take out the component from the vehicle. Position the knuckle back onto the vehicle before tightening the bolts which join the knuckle to the strut at 123 nm (90 ft. Lbs.). Begin installation by placing the front lower control arm ball stud into the knuckle followed by reinstalling the outer tie rod to the Steering Knuckle then reinstalling the front wheel drive shaft bearing. After completion the tire and wheel assembly should be restored to its position and the car lowered back to the ground.