How to replace the Sway Bar Link on 2002 GMC Savana 3500?

The process of sway bar link replacement begins with vehicle elevation using safety stands that should maintain right and left parts detached from one another. The link bolt spacer assembly requires its nuts to be removed first followed by link bolts and spacer assemblies. Start by installing spacer assemblies and then link bolt assemblies as the first step. Fasten the link bolt spacer assembly retaining nut until it reaches 18 Nm torque (13 ft. lbs.). The vehicle should end with safety stand removal and subsequent lowering.

OEM 2002 GMC Savana 3500 Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Sway Bar Link found

View related parts
2002 GMC Savana 3500 Stabilizer Link
Part Number: 15963924
Product Specifications
- Other Name: Link, Stabilizer Shaft; Sway Bar Link; Link
- Position: Front
- Item Weight: 1.10 Pounds
- Item Dimensions: 9.5 x 2.1 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15963924
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 GMC Savana 3500 Submodels:
- Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS

2002 GMC Savana 3500 Sway Bar Link

With a comprehensive array of OEM 2002 GMC Savana 3500 Sway Bar Link, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 GMC Savana 3500 Sway Bar Link are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 GMC Savana 3500 Parts Questions & Experts Answers

Q: How to replace the Sway Bar Link on 2002 GMC Savana 3500?
A: The process of sway bar link replacement begins with vehicle elevation using safety stands that should maintain right and left parts detached from one another. The link bolt spacer assembly requires its nuts to be removed first followed by link bolts and spacer assemblies. Start by installing spacer assemblies and then link bolt assemblies as the first step. Fasten the link bolt spacer assembly retaining nut until it reaches 18 Nm torque (13 ft. lbs.). The vehicle should end with safety stand removal and subsequent lowering.