How to replace the Release Hood Cable on 2003 Buick Century?

Open hood, remove left headlamp, block latch. Detach cable from latch, remove fender brace and air cleaner. Tie wire to old cable. Remove retainers, pull carpet, detach handle, remove grommet and cable. Feed and seal new cable, reconnect handle, secure retainers, route, reinstall air cleaner, brace, latch, headlamp, unblock latch, test, close hood.

OEM 2003 Buick Century Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Hood Cables found

View related parts
2003 Buick Century Release Cable Part Number: 10407412
Product Specifications
- Other Name: Cable, Hood Latch; Hood Release Cable
- Item Weight: 1.30 Pounds
- Item Dimensions: 3.8 x 11.9 x 11.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10407412
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
View related parts
2003 Buick Century Release Handle Part Number: 10285029
Product Specifications
- Other Name: Handle, Hood Latch; Handle
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.5 x 3.1 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10285029
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Century Submodels:
- Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS

2003 Buick Century Hood Cable

With a comprehensive array of OEM 2003 Buick Century Hood Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Buick Century Hood Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Buick Century Hood Cable Parts and Q&A

Q: How to replace the Release Hood Cable on 2003 Buick Century?
A: Open hood, remove left headlamp, block latch. Detach cable from latch, remove fender brace and air cleaner. Tie wire to old cable. Remove retainers, pull carpet, detach handle, remove grommet and cable. Feed and seal new cable, reconnect handle, secure retainers, route, reinstall air cleaner, brace, latch, headlamp, unblock latch, test, close hood.