How to replace the Ride Height Sensor on 2003 Buick LeSabre?

In order to change the Automatic Level Control Sensor, pull up the vehicle and take off the wheel. Loosen the mounting nut by removing its height sensor connector and sensor link. Take out the sensor and insert the new sensor then slide the sensor and tighten the nut. Re-connect sensor link and connector then re-fit the wheel.

OEM 2003 Buick LeSabre Ride Height Sensor

Suspension Level Hight Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ride Height Sensor found

View related parts
2003 Buick LeSabre Position Sensor, Driver Side Part Number: 25728489
Product Specifications
- Other Name: Sensor, Air Suspension Leveling Or Level Control; Ride Height Sensor; Rear Sensor; Height Sensor; Sensor
- Position: Driver Side
- Replaces: 22189837, 22176267
- Item Weight: 0.90 Pounds
- Item Dimensions: 8.2 x 6.5 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25728489
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS

2003 Buick LeSabre Ride Height Sensor

With a comprehensive array of OEM 2003 Buick LeSabre Ride Height Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Buick LeSabre Ride Height Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Buick LeSabre Ride Height Sensor Parts and Q&A

Q: How to replace the Ride Height Sensor on 2003 Buick LeSabre?
A: In order to change the Automatic Level Control Sensor, pull up the vehicle and take off the wheel. Loosen the mounting nut by removing its height sensor connector and sensor link. Take out the sensor and insert the new sensor then slide the sensor and tighten the nut. Re-connect sensor link and connector then re-fit the wheel.