How to replace the liftgate hinges on the Aztek on 2003 Buick Rendezvous?

Start your Aztek liftgate hinge replacement by removing the liftgate and marking its hinge locations with a grease pencil. Start by marking the shim locations on the liftgate hinges then take out their nuts. Pull out the liftgate hinges together with their shims and seals from the vehicle through careful extraction. Install liftgate hinges positioning them alongside their marked specifications for shims and seals. Drive the nuts onto the liftgate hinges before using a torque wrench to tighten them to 33 N.m (28 lb ft). Finally, reinstall the liftgate.

OEM 2003 Buick Rendezvous Liftgate Hinge

Luggage Compartment Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Liftgate Hinge found

View related parts
2003 Buick Rendezvous Hinge
Part Number: 10322113
Product Specifications
- Other Name: Liftgate Hinge; Door Hinge; Hinge, Rear Compartment Lid And End Gate
- Replaces: 10308983
- Item Weight: 1.00 Pounds
- Item Dimensions: 6.9 x 6.6 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10322113
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

2003 Buick Rendezvous Liftgate Hinge

With a comprehensive array of OEM 2003 Buick Rendezvous Liftgate Hinge, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Buick Rendezvous Liftgate Hinge are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Buick Rendezvous Parts Questions & Experts Answers

Q: How to replace the liftgate hinges on the Aztek on 2003 Buick Rendezvous?
A: Start your Aztek liftgate hinge replacement by removing the liftgate and marking its hinge locations with a grease pencil. Start by marking the shim locations on the liftgate hinges then take out their nuts. Pull out the liftgate hinges together with their shims and seals from the vehicle through careful extraction. Install liftgate hinges positioning them alongside their marked specifications for shims and seals. Drive the nuts onto the liftgate hinges before using a torque wrench to tighten them to 33 N.m (28 lb ft). Finally, reinstall the liftgate.