OEM 2003 Buick Rendezvous Washer Reservoir

2003 Buick Rendezvous Parts Questions & Experts Answers

• Q: How to replace the washer reservoir on 2003 Buick Rendezvous?

  A: To replace the washer solvent container start by taking out the battery and drain the washer solvent from inside. Disconnect the electrical sensor of the washer solvent container and you must disconnect the electrical connection to the rear washer pump (if equipped) as well as the washer hose from the pump. Untighten the electric connection and water hose between the front washer pump and its system. Take out the washer solvent container from the vehicle by unscrewing the retaining screws. Insert the new washer solvent container into its mounting point on the right side engine compartment and fasten it with screws before tightening them to ten newton meters (89 pounds inch). Simply connect the washer solvent level sensor wires and replace the electrical link to the washer pump at the back. Also attach the washer hose to the rear washer pump as necessary. Secure the front washer pump connections by attaching the electrical connector and hose to its components. Put washer solvent into the container and put back the battery at the end of the service.