OEM 2002 Buick Rendezvous Washer Reservoir

2002 Buick Rendezvous Washer Reservoir Parts and Q&A

• Q: How to replace the washer reservoir on 2002 Buick Rendezvous?

  A: Washer Reservoir replacement requires removal of the battery followed by draining solvent from the reservoir. Erase connections of the electrical level sensor for the Washer Reservoir, the rear washer pump electrical connector (when present) and disconnect the washer hose from the rear washer pump (when present). After disconnecting the electrical connector for the front washer pump you must also remove the front washer hose from that same pump. To remove the Washer Reservoir from your vehicle you first need to unscrew its mounting screws. The wash solvent reservoir must be placed in the right side engine compartment during installation then secured with screws at 10 n.m (89 lb in). Complete the Washer Reservoir level sensor electrical connector, rear washer pump electrical connector, and washer hose to rear washer pump connections (if equipped). Next install the electrical connector of the front washer pump along with its front washer hose to the device. Pour washer solvent into the Washer Reservoir and replace the battery into position.