ChevyParts
My Garage
My Account
Cart
OEM 2003 Cadillac CTS Battery Cable
Car Battery Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Battery Cables found
Product Specifications- Other Name: Cable Assembly-Battery Positive; Battery Cables; Cable, Battery(Positive)
- Item Weight: 2.30 Pounds
- Item Dimensions: 3.1 x 21.6 x 20.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25736491
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Cable Assembly-Battery Negative; Cable, Battery Ground(Negative)
- Replaces: 25742031
- Item Weight: 1.50 Pounds
- Item Dimensions: 9.8 x 3.5 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25752158
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Cable Assembly-Battery Negative; Battery Cables; Ground Strap; Cable, Battery Ground(Negative)
- Item Weight: 1.50 Pounds
- Item Dimensions: 11.2 x 12.9 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25742032
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2003 Cadillac CTS Battery Cable
With a comprehensive array of OEM 2003 Cadillac CTS Battery Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Cadillac CTS Battery Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2003 Cadillac CTS Parts Questions & Experts Answers
- Q: How to disconnect the battery negative cable and calibrate the power sunroof, power windows, and heat and A/C control head using the Battery Cable on 2003 Cadillac CTS?A: Begin the battery negative cable disconnect process by shutting off all lamps and accessories followed by turning the Ignition Switch off before the removal of the Battery Cable. During installation connect the negative Battery Cable to the battery but make sure to clean all electrical connectors including the cable bolt and terminal and cable as you tighten the bolt to 17 n.m (13 lb ft). To calibrate the power sunroof select run on the Ignition Switch then hold the closed power sunroof switch position for 3 seconds once it reaches a complete stop. Start by positioning the switch to tilt, wait 3 seconds after the cycle completion then advance to full open before returning to closed with another 3-second hold. The power windows calibration requires two steps for each window by turning the Ignition Switch to run and holding the power button down for 3 seconds after the window cycles to full down followed by pressing the button up for 3 seconds after reaching full up. Turning the Ignition Switch to run while pressing auto and off on the control head simultaneously will initiate stepper motor cycling during calibration period. The process requires a minimum 5-second button press for performance validation.
