OEM 2003 Cadillac CTS Exhaust Manifold

Engine Exhaust Manifold
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Exhaust Manifolds found

  • 2003 Cadillac CTS Exhaust Manifold - 24412093
    2003 Cadillac CTS Exhaust Manifold Diagram - 24412093
    View related parts

    2003 Cadillac CTS Exhaust Manifold, Driver Side

    Part Number: 24412093
    $26.27 MSRP: $390.88
    You Save: $364.61 (94%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Manifold, Engine Exhaust Manifold; Catalytic Converter; Converter; Manifold
    • Position: Driver Side
    • Item Weight: 6.20 Pounds
    • Item Dimensions: 12.6 x 9.3 x 4.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 24412093
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2003 Cadillac CTS Submodels:
    • Base, Luxury, Luxury Sport | 6 Cyl 3.2 L GAS
  • 2003 Cadillac CTS Exhaust Manifold - 24412092
    2003 Cadillac CTS Exhaust Manifold Diagram - 24412092
    View related parts
    Product Specifications
    • Other Name: Manifold, Engine Exhaust Manifold; Catalytic Converter; Converter; Manifold
    • Position: Passenger Side
    • Item Weight: 7.80 Pounds
    • Item Dimensions: 15.1 x 11.4 x 6.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 24412092
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2003 Cadillac CTS Submodels:
    • Base, Luxury, Luxury Sport | 6 Cyl 3.2 L GAS

2003 Cadillac CTS Exhaust Manifold

With a comprehensive array of OEM 2003 Cadillac CTS Exhaust Manifold, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Cadillac CTS Exhaust Manifold are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Cadillac CTS Exhaust Manifold Parts Questions & Experts Answers

  • Q: How to replace the right exhaust manifold on 2003 Cadillac CTS?
    A: The drive belt tensioner must be uninstalled prior to replacing the right Exhaust Manifold. First remove the engine wiring harness from the ecm bracket by disconnecting 2 cable harness clips and position the clips to the side. Two bolts securing the after boil coolant pump to the ecm bracket must be removed before placing them aside. Using tools disconnect the heated Oxygen Sensor pigtail from its position connecting to the wiring harness connector. Take out the three upper and one front lower right of the Exhaust Manifold retaining nuts. First remove the Starter and heated Oxygen Sensor according to requirements before taking out the remaining right Exhaust Manifold retaining nuts. The engine operation requires extraction of the right Exhaust Manifold alongside the gasket while discarding the gasket for replacement. Before applying the new Exhaust Manifold gasket over the cylinder head studs the right Exhaust Manifold should undergo clean inspection. Position the right Exhaust Manifold on the right cylinder head before installing 3 lower nuts which should be torqued to 20 nm (15 ft. Lbs.). When heated Oxygen Sensor removal occurred, reposition it before you put on the Starter motor unit. Complete the installation of right Exhaust Manifold nuts while tightening each of them to 20 nm (15 ft. Lbs.). The heated Oxygen Sensor pigtail receives wiring harness connection and you should install the after boil coolant pump to the ecm bracket with 2 bolts which need 10 nm (89 inch lbs.) torque. You must now link both clips from the engine wiring harness cable to the ecm bracket before installing the drive belt tensioner.

Related 2003 Cadillac CTS Parts