How to replace the hazard and turn signal flashers in the Hazard Switch assembly on 2003 Cadillac Seville?

To change the hazard and turn signal flashers that are attached to the hazard switch assembly, unplug the electrical connector by removing the instrument panel right accessory trim plate. Finally, pop off the locking tabs to remove the hazard switch. For installation, push the hazard switch into the bezel until the locking tabs go into place and then, connect the hazard switch electrical connector and also install back the instrument panel right accessory trim plate.

OEM 2003 Cadillac Seville Turn Signal Flasher

Turn Signal Indicator Flasher

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Turn Signal Flasher found

View related parts
2003 Cadillac Seville Turn Signal Flasher
Part Number: 3548813
$22.30 MSRP: $43.29
You Save: $20.99 (49%)
ADD TO CART
Product Specifications
- Other Name: Flasher Assembly-Turn Signal Lamp; Flasher; Flasher, Turn Signal Lamp
- Replaces: 3543666
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.3 x 2.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3548813
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Cadillac Seville Submodels:
- Base, SLS, STS | 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS

2003 Cadillac Seville Turn Signal Flasher

With a comprehensive array of OEM 2003 Cadillac Seville Turn Signal Flasher, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Cadillac Seville Turn Signal Flasher are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Cadillac Seville Parts Questions & Experts Answers

Q: How to replace the hazard and turn signal flashers in the Hazard Switch assembly on 2003 Cadillac Seville?
A: To change the hazard and turn signal flashers that are attached to the hazard switch assembly, unplug the electrical connector by removing the instrument panel right accessory trim plate. Finally, pop off the locking tabs to remove the hazard switch. For installation, push the hazard switch into the bezel until the locking tabs go into place and then, connect the hazard switch electrical connector and also install back the instrument panel right accessory trim plate.

Related 2003 Cadillac Seville Parts

Alternate Year Models

2002 Cadillac Seville Turn Signal Flasher