Make sure this part fits

GM 3548813
Turn Signal Flasher

1992-2003 GM

Customer Questions & Expert Answers (12)
GM 3548813 Turn Signal Flasher
  • Part Description
    Flasher Assembly-Turn Signal Lamp
  • Replaces
    3543666
  • Manufacturer
    General Motors
Make sure this part fits
$22.30 MSRP: $43.29
You Save: $20.99 (49%)
1
ADD TO CART
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number3548813
    Part DescriptionFlasher Assembly-Turn Signal Lamp
    Other NamesFlasher; Flasher, Turn Signal Lamp
    Item Dimensions3.3 x 2.2 x 2.1 inches
    Item Weight0.40 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces3543666
    ManufacturerGeneral Motors
    SKU3548813
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1994-1999 Cadillac DeVilleBase, Concours, d'Elegance8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
    1992-2002 Cadillac EldoradoBase, ESC, ETC, Sport, Touring8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
    1992-2003 Cadillac SevilleBase, SLS, STS8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is 3548813 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 3548813 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to service and repair the turn signal flasher on Cadillac Seville? Posted by Customer
    A:
    Your first step to repair the turn signal flasher is to disconnect the left knee bolster. First remove the turn/hazard flasher module from its position and disconnect the electrical connector. First connect the electrical connector and then install the turn/hazard flasher module before returning the left knee bolster to its place.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you remove the reverse lamp relay for the 2001 Cadillac Seville? Posted by Customer
    A:
    Remove the reverse lamp relay from the rear fuse block.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What is the next step after taking off the cover for the 2001 Cadillac Eldorado? Posted by Customer
    A:
    Remove the reverse lamp relay.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    How do you install the new turn signal flasher for the 2002 Cadillac Eldorado? Posted by Customer
    A:
    Connect the electrical connector to the turn signal flasher and position it into the slot in the instrument panel carrier assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Turn Signal Flasher
    Q:
    What is the first step to service the turn signal flasher for the 2000 Cadillac Eldorado? Posted by Customer
    A:
    Remove the left closeout/insulator panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Turn Signal Flasher
    Q:
    What should be done after connecting the electrical connector for the 2001 Cadillac Eldorado? Posted by Customer
    A:
    Position the turn signal flasher into the slot in the instrument panel carrier assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Turn Signal Flasher
    Q:
    What should be done after inserting the new relay for the 2002 Cadillac Eldorado? Posted by Customer
    A:
    Replace the cover on the relay center.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What is the installation process for the hazard switch for the 2001 Cadillac Seville? Posted by Customer
    A:
    Press the hazard switch into the bezel until the locking tabs engage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Turn Signal Flasher
    Q:
    What is the final step in the replacement process for the 2002 Cadillac Seville? Posted by Customer
    A:
    Reinstall the instrument panel right accessory trim plate.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Turn Signal Flasher
    Q:
    What is the next step after accessing the reverse lamp relay for the 2000 Cadillac Seville? Posted by Customer
    A:
    Remove the reverse lamp relay from the rear fuse block.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Relay
    Q:
    What is the installation process for the hazard switch for the 2003 Cadillac Seville? Posted by Customer
    A:
    Press the hazard switch into the bezel until the locking tabs engage.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Turn Signal Flasher
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 3548813, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 3548813 Turn Signal Flasher. It is sometimes referred to as GM Relay, GM Turn Signal Flasher. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 3548813 Turn Signal Flasher. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Cadillac parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery