How to adjust the preload of the rack and pinion gear bearing off on 2003 Chevrolet Corvette?

To tune the preload of the rack and pinion gear bearing off the vehicle, begin by loosening the adjuster plug lock nut . Next, the adjuster plug should be turned clockwise till it bottoms in the gear assembly and then turned back 50 degrees to 70 degrees (about one flat). After this adjustment, place the adjuster plug lock nut onto the adjuster plug and keep the adjuster plug fix while tightening the lock nut up to 68 Nm (50 ft. lbs.).

OEM 2003 Chevrolet Corvette Rack And Pinion

Steering Rack And Pinion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Rack And Pinion found

View related parts
2003 Chevrolet Corvette Steering Gear
Part Number: 26075933
Product Specifications
- Other Name: Gear Kit, Steering (Remanufacture); Gear Assembly; Gear Kit, Steering
- Replaces: 26075861
- Item Weight: 11.00 Pounds
- Item Dimensions: 55.9 x 11.5 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26075933
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS

2003 Chevrolet Corvette Rack And Pinion

With a comprehensive array of OEM 2003 Chevrolet Corvette Rack And Pinion, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet Corvette Rack And Pinion are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Chevrolet Corvette Rack And Pinion Parts Questions & Experts Answers

Q: How to adjust the preload of the rack and pinion gear bearing off on 2003 Chevrolet Corvette?
A: To tune the preload of the rack and pinion gear bearing off the vehicle, begin by loosening the adjuster plug lock nut . Next, the adjuster plug should be turned clockwise till it bottoms in the gear assembly and then turned back 50 degrees to 70 degrees (about one flat). After this adjustment, place the adjuster plug lock nut onto the adjuster plug and keep the adjuster plug fix while tightening the lock nut up to 68 Nm (50 ft. lbs.).