How to replace the front Ride Height Sensor for the electronic suspension on 2003 Chevrolet Corvette?

The first step to replace the front position sensor for electronic suspension involves turning off the Ignition Switch while using a proper safety stand to lift the vehicle. First disconnect the tire from its assembly then pull out the connector attached to the position sensor before removing each position sensor cable retainer. Before removing the position sensor from the vehicle workers must detach the position sensor link from the control arm link stud and then remove the position sensor mounting bolts. Follow the fastener notice in service precautions before installing the new position sensor into the vehicle. Tighten each position sensor mounting bolt to 3 nm (26 inch lbs.). Place the position sensor link back to the control arm link stud then wire the position sensor electrical connector before storing the position sensor harness with retainers. Reinsert the tire and wheel components then raise the car back to its original height.

OEM 2003 Chevrolet Corvette Ride Height Sensor

Suspension Level Hight Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Ride Height Sensors found

View related parts
2003 Chevrolet Corvette Sensor, Passenger Side
Part Number: 22153636
Product Specifications
- Other Name: Sensor, Air Suspension Leveling Or Level Control; Ride Height Sensor
- Position: Passenger Side
- Item Weight: 1.80 Pounds
- Item Dimensions: 5.0 x 5.4 x 9.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22153636
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2003 Chevrolet Corvette Sensor, Driver Side
Part Number: 22153635
Product Specifications
- Other Name: Sensor, Air Suspension Leveling Or Level Control; Ride Height Sensor
- Position: Driver Side
- Item Weight: 1.80 Pounds
- Item Dimensions: 4.9 x 5.3 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22153635
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2003 Chevrolet Corvette Sensor, Rear Driver Side
Part Number: 22153637
Product Specifications
- Other Name: Sensor Assembly, Electronic Suspension Rear Position (W/Rear Vertical Accelerometer); Ride Height Sensor; Sensor, Air Suspension Leveling Or Level Control
- Position: Rear Driver Side
- Item Weight: 1.60 Pounds
- Item Dimensions: 5.0 x 5.3 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22153637
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2003 Chevrolet Corvette Sensor, Passenger Side
Part Number: 22153638
Product Specifications
- Other Name: Ride Height Sensor; Sensor, Air Suspension Leveling Or Level Control
- Position: Passenger Side
- Item Weight: 2.30 Pounds
- Item Dimensions: 5.0 x 5.4 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22153638
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS

2003 Chevrolet Corvette Ride Height Sensor

With a comprehensive array of OEM 2003 Chevrolet Corvette Ride Height Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet Corvette Ride Height Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Chevrolet Corvette Parts Questions & Experts Answers

Q: How to replace the front Ride Height Sensor for the electronic suspension on 2003 Chevrolet Corvette?
A: The first step to replace the front position sensor for electronic suspension involves turning off the Ignition Switch while using a proper safety stand to lift the vehicle. First disconnect the tire from its assembly then pull out the connector attached to the position sensor before removing each position sensor cable retainer. Before removing the position sensor from the vehicle workers must detach the position sensor link from the control arm link stud and then remove the position sensor mounting bolts. Follow the fastener notice in service precautions before installing the new position sensor into the vehicle. Tighten each position sensor mounting bolt to 3 nm (26 inch lbs.). Place the position sensor link back to the control arm link stud then wire the position sensor electrical connector before storing the position sensor harness with retainers. Reinsert the tire and wheel components then raise the car back to its original height.