How to replace the rear Ride Height Sensor for the electronic suspension on 2004 Chevrolet Corvette?

You need to switch off the ignition before using a safety stand to lift the vehicle and start the replacement process on the rear position sensor for electronic suspension. Start by taking off the tire assembly then disconnect the position sensor connector before removing the position sensor harness retainers. The control arm link stud requires removal of the position sensor link followed by the position sensor mounting bolts to pull the position sensor out of the vehicle. To fit the new position sensor you must place it into the vehicle while following the fastener notice in service precautions then install the mounting bolts using 7 nm (62 inch lbs.) torque. After connecting the position sensor link to the control arm link stud secure the purchased position sensor connector while also putting retainers on the harness. The installation ends with reattaching the tire and wheel assembly after lowering the vehicle to the ground.

OEM 2004 Chevrolet Corvette Ride Height Sensor

Suspension Level Hight Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Ride Height Sensors found

View related parts
2004 Chevrolet Corvette Sensor, Passenger Side
Part Number: 22153636
Product Specifications
- Other Name: Sensor, Air Suspension Leveling Or Level Control; Ride Height Sensor
- Position: Passenger Side
- Item Weight: 1.80 Pounds
- Item Dimensions: 5.0 x 5.4 x 9.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22153636
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2004 Chevrolet Corvette Sensor, Driver Side
Part Number: 22153635
Product Specifications
- Other Name: Sensor, Air Suspension Leveling Or Level Control; Ride Height Sensor
- Position: Driver Side
- Item Weight: 1.80 Pounds
- Item Dimensions: 4.9 x 5.3 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22153635
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2004 Chevrolet Corvette Sensor, Rear Driver Side
Part Number: 22153637
Product Specifications
- Other Name: Sensor Assembly, Electronic Suspension Rear Position (W/Rear Vertical Accelerometer); Ride Height Sensor; Sensor, Air Suspension Leveling Or Level Control
- Position: Rear Driver Side
- Item Weight: 1.60 Pounds
- Item Dimensions: 5.0 x 5.3 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22153637
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2004 Chevrolet Corvette Sensor, Passenger Side
Part Number: 22153638
Product Specifications
- Other Name: Ride Height Sensor; Sensor, Air Suspension Leveling Or Level Control
- Position: Passenger Side
- Item Weight: 2.30 Pounds
- Item Dimensions: 5.0 x 5.4 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22153638
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS

2004 Chevrolet Corvette Ride Height Sensor

With a comprehensive array of OEM 2004 Chevrolet Corvette Ride Height Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Corvette Ride Height Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Corvette Parts Questions & Experts Answers

Q: How to replace the rear Ride Height Sensor for the electronic suspension on 2004 Chevrolet Corvette?
A: You need to switch off the ignition before using a safety stand to lift the vehicle and start the replacement process on the rear position sensor for electronic suspension. Start by taking off the tire assembly then disconnect the position sensor connector before removing the position sensor harness retainers. The control arm link stud requires removal of the position sensor link followed by the position sensor mounting bolts to pull the position sensor out of the vehicle. To fit the new position sensor you must place it into the vehicle while following the fastener notice in service precautions then install the mounting bolts using 7 nm (62 inch lbs.) torque. After connecting the position sensor link to the control arm link stud secure the purchased position sensor connector while also putting retainers on the harness. The installation ends with reattaching the tire and wheel assembly after lowering the vehicle to the ground.