ChevyParts
My Garage
My Account
Cart
OEM 2003 Chevrolet Malibu Alternator Bracket
Alternator Mount- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Alternator Bracket found
2003 Chevrolet Malibu Alternator Bracket Part Number: 24509024
Product Specifications- Other Name: Bracket-Generator; Alternator Mount Bracket; Bracket, Generator Mounting
- Replaces: 24503842
- Item Weight: 1.50 Pounds
- Item Dimensions: 7.7 x 5.7 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24509024
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2003 Chevrolet Malibu Alternator Bracket
With a comprehensive array of OEM 2003 Chevrolet Malibu Alternator Bracket, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet Malibu Alternator Bracket are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2003 Chevrolet Malibu Alternator Bracket Parts and Q&A
- Q: How to replace the Alternator Bracket (Second Design) on 2003 Chevrolet Malibu?A: The first step to replace the generator bracket (Second Design) is disconnecting the negative Battery Cable. The maintenance technician should rotate the Drive Belt tensioner counterclockwise to remove the generator device. The process starts by removing the Drive Belt tensioner bolt followed by the Drive Belt tensioner. Then comes the Drive Belt idler pulley bolt and its pulley. The next step involves removing generator bracket bolts followed by the generator bracket. Begin the installation process with the generator bracket followed by its bolts which should be tightened in order to 50 n.m (37 lb ft). The installation of the Drive Belt tensioner along with its bolt requires you to tighten it to 50 n.m (37 lb ft). Afterward install the Drive Belt idler pulley together with its bolt then tighten it to 50 n.m (37 lb ft). After reinstallation of the generator complete the installation by rotating the Drive Belt tensioner counterclockwise before reconnecting the negative Battery Cable.
