How to replace the power mirror switch on 2003 Chevrolet SSR?

You must start by taking off the door trim panel so you can release locking tabs on the bezel from its interior position before extracting the power mirror switch bezel. Removal of the power mirror switch starts by extracting it from the door followed by removing its electrical connection. You must first feed the power mirror switch into the door trim panel before mounting the power mirror bezel onto the panel until it sits completely inside. Attach the electrical connector before putting back the door trim panel-for-done.

OEM 2003 Chevrolet SSR Mirror Switch

Power Mirror Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Mirror Switch found

View related parts
2003 Chevrolet SSR Mirror Switch, Rear Driver Side
Part Number: 10370497
Product Specifications
- Other Name: Switch, Rear View Mirror-Inside & Outside; Power Mirror Switch; Switch, Rear View Mirror - Inside & Outside
- Position: Rear Driver Side
- Replaces: 10370498
- Item Weight: 3.10 Pounds
- Item Dimensions: 8.8 x 3.4 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10370497
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2003 Chevrolet SSR Mirror Switch

With a comprehensive array of OEM 2003 Chevrolet SSR Mirror Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet SSR Mirror Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Chevrolet SSR Parts Questions & Experts Answers

Q: How to replace the power mirror switch on 2003 Chevrolet SSR?
A: You must start by taking off the door trim panel so you can release locking tabs on the bezel from its interior position before extracting the power mirror switch bezel. Removal of the power mirror switch starts by extracting it from the door followed by removing its electrical connection. You must first feed the power mirror switch into the door trim panel before mounting the power mirror bezel onto the panel until it sits completely inside. Attach the electrical connector before putting back the door trim panel-for-done.