OEM 2003 Chevrolet SSR Window Motor

2003 Chevrolet SSR Parts Questions & Experts Answers

• Q: How to replace the front door window motor on 2003 Chevrolet SSR?

  A: One must start by operating the window to its highest position and then taking off the door trim panel before beginning work. Begin by removing the door water deflector which leads into removing the door window. Disconnect the wiring harness from the door Window Regulator motor before removing the 4 bolts that secure the motor will prevent cable gear housing failure. The door Window Regulator motor should be wiggled to detach from the cable housing while keeping track of its original position before taking it out from the door regulator assembly. The new door Window Regulator motor installation requires wiggling it into the cable housing before tightly securing it with 4 bolts at 5 n.m (44 lb in). After reinstalling the door window you should attach the wiring harness of the door Window Regulator motor. Use a wire connector to check the window movement after connecting it to the switch but then return the harness to its disconnected state. The installation requires both the front door water deflector and the side front door trim panel. The window cycle learn process must be finished as the last step to verify that the folding top works correctly.