OEM Chevrolet SSR Window Motor

Chevrolet SSR Window Motor Parts Questions & Experts Answers

• Window Motor
  88980703
  Q: How to replace the front door window motor on Chevrolet SSR?

  A: The first step to replace front door window motors requires users to lift the window then uninstall any door trim panels. The first step requires removal of the front door water deflector followed by removal of the door window. The first step is to detach the wiring harness from the door Window Regulator motor followed by removing the 4 securing bolts while keeping the cable gear inside its housing to prevent failure. Test the door Window Regulator motor while moving it away from the cable housing with attention to its position before removing it from the door regulator assembly. The new door Window Regulator motor insertion into the cable housing begins with a delicate wiggling motion before bolting it with 4 torques to 5 n.m (44 lb in). Attach the door window and connect the electrical harness to the door Window Regulator motor. Check the window operation by connecting the wire connector to the switch but later disconnect the wiring harness from the switch. Place the front door water deflector and suitably install the side front door trim panel. To verify proper folding top functionality it is important to execute the window cycle learn procedure.