How to Replace the Rear Brake Line on Disc Brakes on 2003 Chevrolet Venture?

First lift the vehicle to working height and take off both tire and wheel assembly to service the rear brake hose on disc brakes. Wipe off all dust and debris from brake hose and pipe fixtures before placing a rubber seal or plug over the open pipe end to keep brake fluid secure. Wrap a secondary wrench around the brake pipe hose to disconnect both parts then seal the brake pipe fitting end with a clip or cap. Be especially cautious not to deform the brake pipe and its supporting components. Take the brake hose retainer clip off its mounting bracket for the brake hose then detach the brake hose from the bracket. Once done unscrew the brake hose bolt from the brake caliper to retrieve the brake hose. Remove the old copper brake hose gaskets that may be stuck to their mounts, then put in rubber plugs to each caliper hole as fluid protection. To install the parts place new copper brake hose gaskets into the hose before inserting the steam brake caliper bolt. Fasten the brake hose bolt to the brake hose with new gaskets and turn the bolt into the brake caliper only until it reaches 54 nm (40 ft. Lbs.). Position the brake hose properly against the notch in the bracket while following its stripe path. Fix the brake hose to the bracket and fasten it with the retainer disc. After removing the rubber cap or plug from the brake pipe end turn the back up wrench to join the brake pipe fitting with the brake hose. Keep tightening until you reach 21 nm (15 ft. Lbs.). End the bleeding process then put back the wheel tire before bringing down the vehicle.

OEM 2003 Chevrolet Venture Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Lines found

View related parts
2003 Chevrolet Venture Flex Hose, Driver Side
Part Number: 22163427
$12.93 MSRP: $50.22
You Save: $37.29 (75%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 17.2 x 2.3 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163427
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2003 Chevrolet Venture Flex Hose, Passenger Side
Part Number: 22163428
$14.65 MSRP: $47.78
You Save: $33.13 (70%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 18.9 x 4.2 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163428
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2003 Chevrolet Venture Flex Hose, Passenger Side
Part Number: 10320040
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 18.4 x 4.7 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10320040
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2003 Chevrolet Venture Flex Hose, Rear
Part Number: 17999811
Product Specifications
- Other Name: Hose, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Item Weight: 1.20 Pounds
- Item Dimensions: 15.7 x 3.6 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17999811
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2003 Chevrolet Venture Flex Hose, Driver Side
Part Number: 10343494
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Replaces: 10303358
- Item Weight: 0.80 Pounds
- Item Dimensions: 15.2 x 4.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10343494
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
View related parts
2003 Chevrolet Venture Flex Hose
Part Number: 17999810
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Rear
- Item Weight: 1.20 Pounds
- Item Dimensions: 11.9 x 4.4 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17999810
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

2003 Chevrolet Venture Brake Line

With a comprehensive array of OEM 2003 Chevrolet Venture Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet Venture Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Chevrolet Venture Brake Line Parts Questions & Experts Answers

Q: How to Replace the Rear Brake Line on Disc Brakes on 2003 Chevrolet Venture?
A: First lift the vehicle to working height and take off both tire and wheel assembly to service the rear brake hose on disc brakes. Wipe off all dust and debris from brake hose and pipe fixtures before placing a rubber seal or plug over the open pipe end to keep brake fluid secure. Wrap a secondary wrench around the brake pipe hose to disconnect both parts then seal the brake pipe fitting end with a clip or cap. Be especially cautious not to deform the brake pipe and its supporting components. Take the brake hose retainer clip off its mounting bracket for the brake hose then detach the brake hose from the bracket. Once done unscrew the brake hose bolt from the brake caliper to retrieve the brake hose. Remove the old copper brake hose gaskets that may be stuck to their mounts, then put in rubber plugs to each caliper hole as fluid protection. To install the parts place new copper brake hose gaskets into the hose before inserting the steam brake caliper bolt. Fasten the brake hose bolt to the brake hose with new gaskets and turn the bolt into the brake caliper only until it reaches 54 nm (40 ft. Lbs.). Position the brake hose properly against the notch in the bracket while following its stripe path. Fix the brake hose to the bracket and fasten it with the retainer disc. After removing the rubber cap or plug from the brake pipe end turn the back up wrench to join the brake pipe fitting with the brake hose. Keep tightening until you reach 21 nm (15 ft. Lbs.). End the bleeding process then put back the wheel tire before bringing down the vehicle.