OEM 2003 GMC Envoy Timing Cover

Engine Timing Cover
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Timing Cover found

  • 2003 GMC Envoy Timing Cover - 12628565
    2003 GMC Envoy Timing Cover Diagram - 12628565
    View related parts
    Product Specifications
    • Other Name: Cover, Engine Front Cover; Timing Cover; Cover, Engine Cover Front
    • Position: Front
    • Replaces: 12601932, 12586647
    • Item Weight: 6.50 Pounds
    • Item Dimensions: 14.4 x 14.7 x 3.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 12628565
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2003 GMC Envoy Submodels:
    • SLE, SLT | 6 Cyl 4.2 L GAS

2003 GMC Envoy Timing Cover

With a comprehensive array of OEM 2003 GMC Envoy Timing Cover, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 GMC Envoy Timing Cover are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 GMC Envoy Timing Cover Parts Questions & Experts Answers

  • Q: How to replace the engine front timing cover on 2003 GMC Envoy?
    A: To replace the engine front cover, it is necessary to do the following: drain the engine coolant, remove the cooling fan and shroud, remove the drive-belt, water pump; the crankshaft balancer; the Power Steering Pump. Lift the vehicle and then remove the Oil Pan and lower the vehicle. Unscrew the center bolt and loosen the rest of the bolts on the front cover of the engine. Use the cover alignment pins (J 44219), insert two of the front cover bolts into the jack screw holes found on the front cover and tighten them evenly to vent or remove the front cover from the engine. Remove the two bolts in front cover and Oil Pump and wash it and check it for any cuts or cracks. For installation apply a 3 mm (0.12 inch) bead of sealer gm p/n 12378521 intro trace groves on the back side of the engine front cover and on the inside three bolt hole bosses. Set up the Oil Pump with the crankshaft sprocket splines and set the front cover; this is to be completed within 10 minutes from the time the sealer is applied. Bolt the front cover bolts, and wash the center bolt for the nm 10 nm (89 inch lbs) at the end, before taking out the cover alignment pins (J 44219). Lift up the vehicle to install the Oil Pan, lower the vehicle, and install the Power Steering Pump, crankshaft balancer, water pump, drivebelt, and lastly the cooling fan and shroud. Top up the engine with coolant to finish off the process.

Related 2003 GMC Envoy Parts